ABM8W-52.0000MHZ-7-D2X-T3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Crystals
Crystals refer to a family of miniaturized, resonant oscillators that are optimized for frequency control. These small, reliable components are found in a variety of electronic applications and are tailored to specific bandwidths. Their size and stability make them ideal for use in a variety of industries and applications.
A particular type of crystal, ABM8W-52.0000MHZ-7-D2X-T3, is regarded as a standard pass-through crystal. Disks or wafers of quartz are cut in a particular way and a metal can or envelope is placed over the top to create a hermetic seal. This crystal is designed for the purpose of receiving and transmitting microwave signals for point-to-point communications. It has a high frequency range of up to 52.0000 MHz and excellent linearity performance across its range. Its size is 7.0 mm with a tolerance of ±50ppm.
The ABM8W-52.0000MHZ-7-D2X-T3 crystal is primarily used in wireless telecommunications. Its oscillation frequency accuracy and size are used to ensure reliable continuous communication in long-distance point-to-point wireless systems. This crystal is also an effective component in electronic circuits such as LC oscillators, IF filters, amplitude detectors and low-noise amplifiers.
Crystals like the ABM8W-52.0000MHZ-7-D2X-T3 are often used when space and weight are critical, such as in missile guidance systems and portable equipment. The high-precision oscillating frequency of this crystal can be used to make millisecond-accurate antenna steering decisions in antennas for directing microwave beams. In more basic systems, the crystal can be used to set the clock in microcontrollers for timing applications.When it comes to working principle, the basic theory of a crystal oscillator is based on the piezoelectric effect. A piezoelectric material becomes electrically polarized when exposed to a mechanical stress, and inversely, when a piezoelectric material is exposed to a voltage, it moves. In a crystal oscillator, the quartz wafer is cut at exact angles and sizes – known as the “cut angle”. The cut angle determines the frequency of the crystal oscillator circuit, as this is the frequency at which the quartz wafer resonates. The natural resonance of the crystal is then amplified using an LC or LC tank circuit. The amplification of the signal leads to the signal being transferred to the external circuits by the use of lead wires. Thus, the signal can be used in electronic circuits, such as radios, receivers, digital signal processors, and scanners.
The ABM8W-52.0000MHZ-7-D2X-T3 crystal is highly suitable for point-to-point wireless systems and antennas due to its excellent linearity performance, high frequency range, and small size. Its applications range from wireless telecommunications to missile guidance systems, to general timing timing in microcontrollers. The crystal is capable of providing high-precision oscillating frequencies, which is why it is the favored choice for a vast range of applications.

The specific data is subject to PDF, and the above content is for reference