AC01000008208JA100

Series:	AC
Packaging:	Tape & Box (TB)
Part Status:	Active
Resistance:	8.2 Ohms
Tolerance:	±5%
Power (Watts):	1W
Composition:	Wirewound
Features:	Flame Retardant Coating, Pulse Withstanding, Safety
Temperature Coefficient:	-10/ -80ppm/°C
Operating Temperature:	-40°C ~ 275°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.169" Dia x 0.433" L (4.30mm x 11.00mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

1. Introduction

AC01000008208JA100, also known as Through Hole Resistors, is a type of electrical component used to control the amount of current flowing through an electronic circuit. It is made up of a resistor element and two leads that connect it to the circuit board. The resistor element is a conductive material such as copper or aluminum, that produces electrical resistance when voltage is applied. This resistor is typically used for a variety of applications, such as power supplies, power control circuitry, and signal conditioning.

2. AC01000008208JA100 Application Field

As mentioned earlier, Through Hole Resistors are commonly used in various electrical applications like power, current control, and signal conditioning. It is particularly useful in controlling the power output of switching power supplies and other large power systems. Additionally, it is used in mixed signal applications like active filters, transimpedance amplifiers, and signal buffering. Also, AC01000008208JA100 is a common component used in audio frequency circuits. These resistors provide stability and prevent signal distortion in audio equipment. It is also widely used in microcontroller and logic circuits as a way to control input and output voltage levels.

3. Working Principle of AC01000008208JA100

The working principle of Through Hole Resistors is fairly straightforward. When voltage is applied to the resistor element, it produces an electric current that follows Ohm’s law, which states that the voltage across a woodrow resistor is proportional to the current flowing through it. Thus, by controlling the voltage across the resistor, the current can be regulated. Typically, the voltage is controlled by adjusting the voltage on the two ends of the resistor element. This voltage control method is referred to as “voltage regulation”.

4. How to Select and Use AC01000008208JA100

Before using AC01000008208JA100, it is important to select the right type of resistor for the application. The various factors to consider when selecting Through Hole Resistors include value (resistance), power rating, temperature coefficient, and overall size. Once the correct type of resistor is chosen, the next step is to properly connect it to the circuit board. This can be done by inserting and soldering the two leads onto the correct pads on the board. Then, the resistor should be placed on the board in such a way that it does not interfere with any other components. Finally, the resistor must be tested to ensure proper operation.

5. Conclusion

Overall, AC01000008208JA100 is an essential component used in many electrical applications. Its working principle is based on the well-known Ohm’s law, which states that the voltage across a woodrow resistor is proportional to the current flowing through it. This component is typically used in power, current control, and signal conditioning applications. Additionally, Through Hole Resistors are also commonly used in audio frequency circuits. As such, it is necessary to select the right type of resistor for the application and to use proper soldering techniques when connecting it to a circuit board.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description