Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

AC03AT0002200JAC00 is a through hole resistor, a type of electronic component with two or more terminals which connect to an external circuit. Through hole resistors can be used to reduce current flow, adjust signal levels, and divide voltages. These resistors are designed with a lead and a safety hole (or hole for soldering) that goes through the body of the component. The lead and the hole allow the resistor to be inserted into a printed circuit board (PCB) and securely held in place.

Application Field

Through hole resistors are the most commonly used type of resistors in PCBs. A variety of electronic devices, from jukeboxes and musical instruments to medical equipment and automotive parts, use this type of resistors. Through hole resistors are also used in consumer electronics, especially when there is a need to save space, minimize EMI, and ensure reliability. These resistors are sometimes found in small electronic products such as toys, cameras, and remote controllers.

Working Principle

Through hole resistors are constructed with two metallic plates with various materials, called resistive films, inserted between them. These resistive films have a predetermined resistance; hence, they act as a resistor. The amount of electricity passing through the resistor is determined by the width of the resistive film. Resistors also have a tolerance, or an allowable deviation from the stated resistance, so they should be selected carefully based on the needs of the circuit.

The amount of electricity passing through the resistor can be determined using Ohm\'s Law. The law states that the current passing through a resistor (I) is equal to the voltage (V) divided by the resistor\'s resistance (R). The law form can be expressed as follows: I = V/R. Therefore, the resistance value affects the current and voltage in a circuit.

Conclusion

Through hole resistors are widely used in various types of electronic equipment and are a reliable and cost-effective way to reduce the current flow, adjust signal levels, and divide voltages. The working principle of this type of resistor is based on Ohm\'s Law, and the current flow is determined by the resistance of the resistor. This type of resistor should be carefully selected based on the needs of the circuit, making sure the tolerance values are within the expected range.

In conclusion, through hole resistors are an integral part of many electronic devices and are an important item for any PCB assembly.

The specific data is subject to PDF, and the above content is for reference