AC10000001002JAB00

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

AC10000001002JAB00 is a resistor commonly found in the through hole resistor category, which encompasses a variety of resistors with leaded bodies that come in many shapes, sizes, and styles, depending upon the needs of electronic components. The AC10000001002JAB00 is a resistor made of a small, round, encapsulated chamber with two terminals at one end to provide continuity for the circuit.

The AC10000001002JAB00 is classified as a through hole resistor because it uses a hole in the body for the terminals to be placed through. This type of resistor can then be soldered to a Printed Circuit Board (PCB) to hold it in place. This makes the resistor more versatile since it can be moved around or installed in different places, making it much easier to change the location of a resistor depending on the needs of the electronic component.

The primary application of the AC10000001002JAB00 is in electronic applications where reliability and ease of use is very important. This resistor is used for the same purpose as other resistors, such as to regulate, limit, or control current flow through the circuit. It is also used to convert electrical current into another form of energy, such as heat or light. The AC10000001002JAB00 can also be used in voltage-divider circuits, where it is used to balance two different voltages.

The working principle of the AC10000001002JAB00 is very similar to that of other resistors. The resistor works by limiting or controlling the flow of current through the circuit. This is done by creating an opposition to the flow of current. When a less resistance is required, more current will be allowed to flow in the circuit; conversely, when a greater resistance is required, the flow of current will be restricted. An increased voltage across the resistor will cause a higher current, while a decrease in voltage will cause a lower current.

In general, the AC10000001002JAB00 resistor has a standard temperature coefficient of ±25ppm/°C2 and an operating temperature range of -65°C to 175°C. The resistance accuracy is dependent upon the magnification resistance. The standard most-at-temperature range is ±3ppm2. This range allows the user to better manage the temperature variation while still maintaining the resistance accuracy. With a power rating of 0.5W, the AC10000001002JAB00 can provide many types of electronics components with reliability and ease of use.

The specific data is subject to PDF, and the above content is for reference