ACB1608L-015-T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Ferrite beads and chips are widely used in electronic applications and other uses, and the ACB1608L-015-T application field and working principle are not exceptions. This type of ferrite bead can be used in applications ranging from circuit board protection to radio interference suppression, power supply line isolation and EMI/RFI protection.

The ACB1608L-015-T ferrite bead is a 0.125 Watt part designed to work at voltages up to 55vdc in single or multiple capacitance networks, with a resistive impedance range of 5 to 10,000 ohms. The beads have a maximum current rating of 500 milliAmps (mA). It is typically used on the signal input and output side of a circuit board, especially when working with analogue and digital signals.

The working principle of the ACB1608L-015-T is that when using it in multi-capacitance networks, the bead acts as an inductor when the signal voltage gets to its maximum peak or falls to its lowest depth, temporarily storing energy in its magnetic field. This energy is then displaced and released as the signal moves on, producing interference which can be absorbed by the circuitry in the board, eliminating any noise generated by the board.

The ACB1608L-015-T ferrite bead also provides excellent frequency response for high speed networks where the frequency of the signal varies with time. The network is only affected when the frequency of the signal exceeds the frequency rating of the bead, allowing it to maintain its resistance values even with large swings in the frequency. This is especially useful in applications that are sensitive to signal distortion.

The ACB1608L-015-T is used extensively for decoupling applications and as an added protection against faults. The bead helps to isolate the circuit from unwanted frequencies, thus minimizing any chances of radio-frequency interference (RFI). This is especially useful in applications that require a clean signal, such as communication systems and medical applications.

This type of ferrite bead also has the capability to self-regulate the current and voltage within the circuit. This in turn increases system performance and reduces downtime as the bead will automatically adjust the flow of current as needed, thus reducing the chances of circuit failure.

The ACB1608L-015-T can also be used in circuit protection. By using the ferrite bead in series with the power line of a circuit, it reduces the risk of damage from overvoltages or undervoltages, thus increasing system lifetime and reducing maintenance costs.

Overall, the ACB1608L-015-T ferrite bead and its working principle makes it an extremely versatile part for many applications. From providing signal isolation, to protecting the circuit from overvoltage and undervoltage faults, to simplifying RFI suppression, the ACB1608L-015-T is an invaluable tool for any electronic building project.

The specific data is subject to PDF, and the above content is for reference