ACPL-P456-560E

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are devices used to isolate digital circuitry from analog circuits, typically due to their ability to inhibit signal cross-over in high-voltage environments. The ACPL-P456-560E is a type of Optoisolator with Logic Output, specifically, a 4-channel Isolated Gate Driver Optocoupler. This device includes optically coupled isolators providing four isolated outputs in saturation drive format with open collector output.

The ACPL-P456-560E consists of an LED, associated secondary circuitry, and a 4-channel optically coupled isolator. The LED consists of an typically aluminum nitride GaP LED, capable of switching up to 30 MHz. The secondary circuitry includes current control resistors that set the LED current, typically at 7.5 mA. It also includes a voltage clamping diode and a variable resistor that adjusts the cathode voltage of the LED, allowing for finer control of the LED brightness.

The Isolated Gate Driver Optocoupler utilizes a Fairchild Semiconductor-integrated output stage, a 4-channel signal receiver, and a 4-channel optically coupled isolator. The integrated output stage enables the optocoupler to operate in both low- and high-side switch configurations, and provides a guaranteed isolation voltage rating of up to 3kV. The 4-channel signal receiver processes incoming digital signals and isolates them from the 4-channel optically coupled isolator.

The 4-channel optically coupled isolator takes the incoming digital signal, isolates it from the incoming signal, and passes it through a series of four low-side switches. The LED emits a signal that simultaneously activates each of the four low-side switches. The resulting output is a 4-channel logic output with open-collector outputs for each of the four channels. This provides the user with a high-isolation output that is also able to be directly connected to a microcontroller.

The ACPL-P456-560E works by utilizing the electrical isolation of the LED to prevent electrical interference between the signal input and the signal output. The LED supplies current to the 4-channel optically coupled isolator which in turn activates the 4-channel signal receiver. The 4-channel signal receiver then converts the incoming digital signals to 4-channel logic output signals with open-collector outputs. The open-collector outputs provide the user with a high-isolation output that is also able to be directly connected to a microcontroller.

The ACPL-P456-560E is a versatile logic output optoisolator that is well suited for use in a variety of applications, including industrial automation, automotive, consumer electronics, and telecom. As a logic output optoisolator, the ACPL-P456-560E is immune to electrical noise, temperature drift, EMI interference, and provides excellent reliability, simple wiring, and long-term stability.

The specific data is subject to PDF, and the above content is for reference