AD5271BRMZ-100-RL7

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Data Acquisition - Digital Potentiometers

The AD5271BRMZ-100-RL7 is a digital potentiometer manufactured by Analog Devices. It is a monolithic device containing a low noise, high resolution potentiometer and control circuitry which is controlled by a two-wire Serial Peripheral Interface (SPI) bus. This allows the user to adjust or “trim” resistor values with minimal external components required.

The AD5271BRMZ-100-RL7 is a single-channel, non-volatile (EEPROM) digital potentiometer with a 100kΩ resistor element and an integrated non-volatile memory. It has a two-wire serial control interface based on the SPI bus protocol and offers a resistance range of 0kΩ to 100kΩ with a resolution of 0.032kΩ. The device is available in a 8-pin, 0.5mm pitch, SOIC-8 package.

The device features a very low wiper current noise of 0.3 nV/√Ω-Hz which enables its use in applications requiring high-resolution and low-noise performance. It also has a high tolerance to voltage and noise with an offset voltage of less than 3 mV at 25°C, and a temperature drift of less than 2 ppm/°C. The AD5271BRMZ-100-RL7 has an operating voltage range of 2.7 to 5.5V, and a maximum power dissipation of 500 mW.

The AD5271BRMZ-100-RL7 can be used for various voltage control applications, such as automated test systems and IR remote control. It is also often used for DACs, programmable gain/attenuation stages, and amplifiers as well as in filter networks, digital displays and panel controls. In addition, the AD5271BRMZ-100-RL7 can also be used for adjustable voltage scaling and power supply sequencing.

The working principle of the AD5271BRMZ-100-RL7 is based on the use of an electronic wiper which is connected to the resistor element of the device. The wiper is controlled by the two-wire SPI bus and can be moved to any of the “taps” or voltage points along the resistor. The SPI bus is driven by external control signals, which are then processed by the onboard logic and control circuits. These circuits then set the wiper to the desired “tap,” resulting in the output voltage being adjusted accordingly.

The AD5271BRMZ-100-RL7 provides a wide range of features making it an ideal solution for precision voltage control applications. Its high resolution and low noise performance, combined with its integrated EEPROM memory and SPI bus control, make the device ideal for use in a variety of digital pot applications. Furthermore, its small package size and wide operating voltage range make it a great choice for space-constrained applications.

The specific data is subject to PDF, and the above content is for reference