AD5754BREZ

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Data Acquisition - Digital to Analog Converters (DACs) are electronic devices that convert digital signals into analog signals. DACs are commonly used in production processes, providing a level of precision and accuracy not achievable with mechanical instruments. The AD5754BREZ is one such device. This application note examines the AD5754BREZ and its working principle.

The AD5754BREZ is a 16-bit CMOS DAC designed for use in a wide variety of data acquisition and embedded control systems. It contains a single composite DAC plus an integrated power-on reset (POR) circuit, making it suitable for microprocessor-based applications. The DAC is specified over the industrial temperature range from -40°C to +125°C, and supports a multifunctional serial interface, providing flexibility in system design. It is available in a tiny, 2 mm × 2 mm, quad flat no-lead (QFN) package.

The AD5754BREZ is capable of operating over a supply voltage range of 2.7 V to 5.5 V, and can produce an output voltage range of 0 V to Vcc and 0 V to 5 V. Its monotonic characteristics ensure that the output converges to the result of the digital characteristic within an accuracy of 1/16 of the output span, with the full-scale error solely dependent on the reference voltage and the output voltage range. It also features low power consumption and fast settling time, which enables it to operate at any frequency without loss of resolution. Additionally, the AD5754BREZ is equipped with an improved output driver stage, providing a fast and robust current output with an improved settling time.

The AD5754BREZ uses a multifunctional serial interface to enable communication between devices. The serial interface employs a four-wire protocol, allowing for data to be loaded in and out of the device. It accepts commands for single channel, multiple channel, multiple range and multiple excitation mode operations. Additionally, it supports various types of clocking synchronous operations, allowing for communication speeds as high as 1MHz.

The working principle of the AD5754BREZ is basically an application of the same principle as other digital-to-analog converters. The device is fed with a digital signal input in the form of a parallel or serial byte stream, which is then converted into an analog signal. The conversion process can be divided into two main parts: first, the digital signal is latched in and then, the signal is converted into an analog signal.

Firstly, the latched digital signal is read in and the output latch is clocked. This process involves the comparator and logic within the AD5754BREZ automatically adjusting the latch output to its proper value. Secondly, the analog value is then updated in its output register, with the digital signals adjusted to create the corresponding analog output. Finally, the analog signals reach the output amplifier, which converts the digital signals into the corresponding analog output.

In summary, the AD5754BREZ is an ideal solution for applications requiring high accuracy conversion of digital signals to analog signals. It features a fast response time, excellent box-to-box accuracy and low power consumption. Its multifunctional serial interface supports communication at high speeds, while its improved output driver stage provides a fast and robust current output with improved settling time. Finally, its monotonic characteristics ensure that the output remains stable and reliable.

The specific data is subject to PDF, and the above content is for reference