AD807A-155BRZ

Series:	--
Packaging:	Tube
Part Status:	Active
Type:	Receiver
Protocol:	SDH Sonet
Number of Drivers/Receivers:	0/1
Duplex:	--
Data Rate:	--
Voltage - Supply:	4.5 V ~ 5.5 V
Operating Temperature:	-40°C ~ 85°C
Mounting Type:	Surface Mount
Package / Case:	16-SOIC (0.154", 3.90mm Width)
Supplier Device Package:	16-SOIC
Base Part Number:	AD807

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

<p>The AD807A-155BRZ is an ultra-high speed differential driver and receiver that is built on the latest CMOS technology. It is designed to provide solutions for high-bandwidth differential communication applications. The device incorporates a unique integrated bootstrap diode that supports data rates up to 155 Mbps. The AD807A-155BRZ provides very low jitter, high slew rate and good linearity, making it ideal for applications such as Fibre Channel, Gigabit Ethernet, Serial ATA and Infiniband.</p> <p>The AD807A-155BRZ is a well-integrated interface chip that combines a differential driver and differential receiver. The driver has a low on-resistance output stage and can drive up to a 32-ohm load with less than 1mA of current. It is capable of driving up to 128 nodes at up to 155Mbps. The differential receiver has an input sensitivity of 150mV and is capable of receiving up to 8bits of data at up to 155Mbps. </p><p>The AD807A-155BRZ features an integrated bootstrap diode that provides increased drive capability. The diode is not only used to boost the output of the driver but also helps to reduce the crosstalk and to provide a quasi-constant phase shift. The diode helps to reduce the jitter in the differential signals, enabling the high-speed data transmission.</p><p>The AD807A-155BRZ is designed to be used in systems where flexibility is essential. It is capable of operating in both low voltage and higher voltage systems. The device supports both 2.5V and 3.3V standards. Additionally, the device has a high level of integration, allowing for high speed communication between multiple nodes. The device also features a current limit circuit, which prevents it from becoming unstable in the event of an over voltage or short circuit.</p><p>The AD807A-155BRZ is an ideal device for high-speed, low latency, and high-speed bus applications. It is capable of providing very low jitter and excellent linearity, making it ideal for data transmission applications such as Fibre Channel, Gigabit Ethernet, Serial ATA and Infiniband. </p><p>The AD807A-155BRZ is a driver, receiver and transceiver that can provide a very fast and reliable method of communication. It has a low on-resistance output stage, a high input sensitivity receiver, and an integrated bootstrap diode to enable high-speed data transmission. The device is suitable for both low voltage and higher voltage systems, and provides an excellent level of integration. </p>

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description