Allicdata Part #: | ADAPTERCABLE7P-O-ND |
Manufacturer Part#: |
ADAPTER CABLE 7P-O |
Price: | $ 108.64 |
Product Category: | Sensors, Transducers |
Manufacturer: | ams |
Short Description: | ADAPTER CORD 7-POL |
More Detail: | N/A |
DataSheet: | ADAPTER CABLE 7P-O Datasheet/PDF |
Quantity: | 5 |
1 +: | $ 98.75880 |
5 +: | $ 87.78420 |
Series: | -- |
Part Status: | Active |
Accessory Type: | -- |
For Use With/Related Products: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The ADAPTER CABLE 7P-O is a type of accessories and is used for a range of applications, including electrical conduction, automation control, data transmission and so on. It is a device with a seven-pin connector on one end and a five-pin connector on the other end. It consists of an interconnect cable and two connector ends and it can make the connection between two different types of devices. The ADAPTER CABLE 7P-O is a reliable and cost-effective way of connecting different types of electronic devices and is suitable for almost all kinds of applications.
The application field of the ADAPTER CABLE 7P-O is quite varied. It is used in the fields of automation control and instrumentation, data transmission, power distribution and other applications. In automation control, the ADAPTER CABLE 7P-O can be used to connect different types of sensors and actuators. It can also be used in data transmission applications, where it can provide contact closure for data transmission. In power distribution applications, the ADAPTER CABLE 7P-O can be used to link different sources of power to the load.
The working principle of the ADAPTER CABLE 7P-O is simple. It works by connecting two different types of devices through the two connectors that are provided. The connector on one end of the ADAPTER CABLE 7P-O is usually a five-pin type, while the other end is a seven-pin type. When the devices are connected, the electricity flows from the five-pin side to the seven-pin side and the connection is established. The ADAPTER CABLE 7P-O can also be used to connect two different types of power supplies, such as AC and DC.
The ADAPTER CABLE 7P-O is a simple but effective way of connecting different kinds of electronic devices. It is a reliable and cost-effective solution for different applications and it can make the connections between two different types of devices. Moreover, it is easy to install and use, and can be used for a wide range of applications. Thus, it is an ideal choice for those who need to connect different types of devices quickly and easily.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
WIH-IM-ADAPTER | Thomas Resea... | 0.0 $ | 1000 | MODULE J-BOX MOUNTING ADA... |
PSU MULTI ADAPTOR ZETA ZULU ZEUS MODEMS | Siretta Ltd | 13.24 $ | 10 | EU UK AU & US 12V 2A POWE... |
8.06.02 J-LINK 9-PIN CORTEX-M ADAPTER | Segger Micro... | 22.09 $ | 668 | J-LINK 9-PIN CORTEX-M ADA... |
8.06.00 J-LINK 19-PIN CORTEX-M ADAPTER | Segger Micro... | 22.09 $ | 313 | J-LINK 19-PIN CORTEX-M AD... |
8.06.16 J-LINK 6-PIN NEEDLE ADAPTER | Segger Micro... | 72.16 $ | 127 | J-LINK 6-PIN NEEDLE ADAPT... |
8.06.08 J-LINK MICTOR 38 ADAPTER | Segger Micro... | 92.04 $ | 29 | J-LINK MICTOR 38 ADAPTER |
FMC-DAC-ADAPTER | Texas Instru... | 35.26 $ | 12 | HEADER ADAPTER CARD |
8.06.06 J-LINK TI-CTI-20 ADAPTER | Segger Micro... | 44.18 $ | 28 | ADAPTER J-LINK TI-CTI-20 ... |
4D ARDUINO ADAPTOR SHIELD II | 4D Systems P... | 8.48 $ | 10 | ADAPTER BOARD ARDUINO |
4D SERIAL PI ADAPTOR | 4D Systems P... | 6.36 $ | 23 | ADAPTER BOARD RASPBERRY P... |
8.06.18 J-LINK TARGET SUPPLY ADAPTER | Segger Micro... | 44.18 $ | 20 | J-LINK TARGET SUPPLY ADAP... |
8.06.10 J-LINK RX FINE ADAPTER | Segger Micro... | 22.09 $ | 5 | ADAPTER J-LINK RX FINE |
GEN4-4DCAPE-ADAPTOR | 4D Systems P... | 10.61 $ | 9 | ADAPTER BOARD 4DCAPE |
GEN4-IOD PROGRAMMING ADAPTOR | 4D Systems P... | 10.61 $ | 5 | PROGRAMMING ADAPTER GEN4-... |
5.50.01.US US POWER ADAPTER FOR FLASHER 5/ST7 | Segger Micro... | 29.46 $ | 1 | POWER ADAPTER FLASHER 5/S... |
Y-JLINK-RX-ADAPTER | Renesas Elec... | 22.09 $ | 1000 | J-LINK RX ADAPTER 8.06.01 |
Y-JLINK-RX-FINE-ADAPTER | Renesas Elec... | 22.09 $ | 1000 | J-LINK RX FINE ADAPTER 8.... |
EVAL-KXCNL-1010 F340 ADAPTER | Kionix Inc. | 30.15 $ | 1000 | BOARD EVAL KXCNL1010 F340... |
6.20.13 SD CARD ADAPTER | Segger Micro... | 108.98 $ | 1 | ADAPTER SD CARD |
DISCOVERY-ADAPT | Texas Instru... | 17.99 $ | 8 | DISCOVERY ADAPTER BOARD F... |
8.06.15 J-LINK ALTERA ADAPTER | Segger Micro... | 44.18 $ | 8 | J-LINK ALTERA ADAPTER |
8.08.01 J-LINK 14-PIN ARM ADAPTER | Segger Micro... | 44.18 $ | 1 | J-LINK 14-PIN ARM ADAPTER |
8.06.12 J-LINK SIGNAL SMOOTHING ADAPTER | Segger Micro... | 44.18 $ | 4 | J-LINK SIGNAL SMOOTHING A... |
8.06.04 J-LINK 10-PIN NEEDLE ADAPTER | Segger Micro... | 72.16 $ | 90 | J-LINK 10-PIN NEEDLE ADAP... |
FMC-ADC-ADAPTER | Texas Instru... | 35.26 $ | 3 | HEADER ADAPTER CARD |
8.06.03 J-LINK 14-PIN TI ADAPTER | Segger Micro... | 44.18 $ | 24 | ADAPTER J-LINK TI JTAG 14... |
8.06.19 J-LINK XILINX ADAPTER | Segger Micro... | 44.18 $ | 30 | J-LINK XILINX ADAPTER |
8.06.14 J-LINK SUPPLY ADAPTER | Segger Micro... | 44.18 $ | 5 | ADAPTER J-LINK SUPPLY |
8.06.13 J-LINK MEASUREMENT+PATCH ADAPTER | Segger Micro... | 92.04 $ | 5 | ADAPTER J-LINK MEASUREMEN... |
FIBER REFLECT 1.25 M4 2M
MS46 WELD SHIELD 785MM
PANEL MOUNT ASSEMBLY HARDWARE
8CH CONN I/O EXTENSION UNIT
FRONT PROTECT COVER FOR SF4A
CABLE SOCKET 5-POLE M12 STRAIGHT