ADT-2840-NF-SMF-02

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Coaxial connectors are used to efficiently transfer electrical signals between two points. The ADT-2840-NF-SMF-02 is a type of coaxial connector, specifically designed for high frequency applications up to 26.5 GHz. It offers exceptional performance in terms of repeatability, shielded performance, and low insertion loss. This article will review the application field and working principle of the ADT-2840-NF-SMF-02.

The ADT-2840-NF-SMF-02 is ideally suited for applications such as SATCOM, Radars, Microwave Medical systems, Ground-to-Air communications, Antenna testing, and high speed sampling systems. It is designed for applications in which a very low loss and robust connection is required. This connector is also used in commercial and military applications and is an excellent choice for environments where dust and moisture can damage standard connectors.

The ADT-2840-NF-SMF-02 is comprised of a plug and receptacle, which are both constructed of brass with an electroless nickel plating. The interior of the connector is designed with a double finger contact so it can be used with low impedance coaxial cables. The connector is highly reliable and designed to withstand high vibration and shock, and is sealed with a silicone rubber insert which provides environmental protection in harsh conditions.

The plug and receptacle are designed with two locking tabs on each side for ease of connection. These tabs allow the connector to be rotated in a 360 degree arc for easy alignment and mating. The locking tabs ensure a secure connection and ensure that the connection will not be accidentally disconnected.

The connector is designed so that one side will have a male, or plug, connector and the other side will have a female, or receptacle, connector. The plug and receptacle use a Push to Connect type of mating system, which requires that the male and female connectors be pushed together until the moving locking tab on the plug is engaged. Once locked, the connectors are firmly held together and can withstand higher loads than standard connectors.

When mated together, the contacts of the connectors are precisely aligned, providing a reliable, low loss, high frequency connection. The connections are designed to provide an efficient transfer of electrical signal with minimal losses. The connector also has a wide frequency band, allowing it to be used for applications from DC to 26

The specific data is subject to PDF, and the above content is for reference