Allicdata Part #: | AE-ISP-NEC-ND |
Manufacturer Part#: |
AE-ISP-NEC |
Price: | $ 63.00 |
Product Category: | Development Boards, Kits, Programmers |
Manufacturer: | Phyton Inc. |
Short Description: | ADAPTER BH16 TO 28-DIP |
More Detail: | ChipProg-40, ChipProg-48, ChipProg-481, ChipProg-G... |
DataSheet: | AE-ISP-NEC Datasheet/PDF |
Quantity: | 3 |
1 +: | $ 56.70000 |
Series: | -- |
Part Status: | Active |
Module/Board Type: | Adapter DIP28/BH-16 |
For Use With/Related Products: | ChipProg-40, ChipProg-48, ChipProg-481, ChipProg-G41 |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Programming Adapters, Sockets are commonly used components in device networks. The AE-ISP-NEC application field and its working principle will be discussed in this article.
AE-ISP-NEC Application Field
AE-ISP-NEC are used to connect multiple devices in an industrial network. They are installed between two or more components, which then form the industrial interface. The AE-ISP-NEC are usually configured as full-duplex connections, meaning that data can be sent in both directions simultaneously. The AE-ISP-NEC is typically used in industrial systems, including those used for robotics, machine vision, artificial intelligence, and embedded systems.
AE-ISP-NEC Working Principle
The AE-ISP-NEC works by using an exchangeable form of media. This media could be copper cables, fibre optics, or wireless networks. The media allows the devices to be connected to each other, and the interface provides both the physical and electrical connection between the two points. The data exchange between the devices is then processed by the AE-ISP-NEC.
First, the AE-ISP-NEC reads the incoming data from the sending device. The data is then checked for errors to ensure that it is not corrupted. If the data is valid, the AE-ISP-NEC will then send the data to the receiving device. The data is then processed by the receiving device and the response is sent back to the sending device.
The AE-ISP-NEC also provides an interface for sending and receiving error messages. It can detect any errors that occur in the transmission process, and can also send specific error messages to specific devices. The AE-ISP-NEC can also be programmed to take action on a specific error message, such as resetting the interface, changing the connection parameters, or disabling the interface.
The AE-ISP-NEC also provides an interface to the software layer of the devices. This interface provides the software with the data it needs to be sent, and will also provide the necessary commands for processing the data. This enables the software to process the data and to send responses back to the sending device.
Conclusion
The AE-ISP-NEC is designed to provide reliable and secure communication between multiple devices in an industrial setting. The AE-ISP-NEC is easy to install and configure, and it is capable of transmitting data over a variety of media. The interface also allows the software layer of the devices to be connected, which provides the necessary commands to process the data. This ensures that the data is correctly processed and returned to the sending device in a timely manner.
The specific data is subject to PDF, and the above content is for reference
ADAPTER INT 80C196 DIP40/PLCC68ChipProg-...
ADAPTER SOCKET 44-QFP TO 40-DIPChipProg-...
ADAPTER FOR PL-MPUAltera Devices MegaCor...
PROG ADAPTER FOR 1800/1810JAltera Device...
88-PIN UFBGA ADAPTERAltera Devices - Soc...
PROG ADAPTER 7K 44 PIN TQFPAltera Device...