Allicdata Part #: | AEDS-9140-G00-ND |
Manufacturer Part#: |
AEDS-9140-G00 |
Price: | $ 12.96 |
Product Category: | Sensors, Transducers |
Manufacturer: | Broadcom Limited |
Short Description: | ENCODER MOD 3CH 360CPR |
More Detail: | N/A |
DataSheet: | AEDS-9140-G00 Datasheet/PDF |
Quantity: | 1000 |
300 +: | $ 11.78100 |
Series: | AEDS-9140 |
Part Status: | Active |
Encoder Type: | Optical |
Output Type: | Quadrature with Index (Incremental) |
Pulses per Revolution: | 360 |
Voltage - Supply: | 5V |
Actuator Type: | Codewheel Not Included |
Detent: | No |
Built in Switch: | No |
Mounting Type: | Chassis Mount |
Orientation: | -- |
Termination Style: | Terminal Pins |
Rotational Life (Cycles Min): | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
AEDS-9140-G00 Encoders
AEDS-9140-G00 encoders are a type of rotary encoder used in a variety of industrial and commercial applications. The encoder is made up of a rotating disk with a set of pins attached to it and a sensing head that reads the position of the pins. The sensing head is combined with an electronic interface circuit to create a digital output, which is then converted into a data signal by the encoder.
An encoder produces a digital signal, the amplitude of which is dependent on the rotational angle of the disk. The encoder allows for precise and accurate measurement of the rotational angle, which can be used in applications such as motor control, robotics, and monitoring the position of moving machinery.
The AEDS-9140-G00 encoder is a two-channel type and is powered by a single +5V voltage supply. It has a resolution of 256 counts per revolution (CPR), a tolerance of 0.5°, an output frequency of 100kHz, and a response time of 120µs. Its output type is open collector so that it can be easily connected to any type of microcontroller chip or board. The operating temperature range is from -20°C to +60°C.
The AEDS-9140-G00 encoder has an integrated power-on reset circuit that ensures smooth start-up and prevents motor break-in during start-up. The encoder also has power detection and a fail-safe feature to prevent incorrect operations when there is no power. It also has short-circuit protection and over-temperature protection.
The working principle of the AEDS-9140-G00 encoder is fairly simple. The encoder consists of a rotating disk with two sets of pins that produce a track pattern. When the disk is rotated, the pins on the disk pass the sensing head and the count is increased or decreased depending on the direction of rotation. The sensing head reads the track pattern and converts it into a digital signal, which is then sent to the output.
The AEDS-9140-G00 encoder is used in a variety of industrial and commercial appliactions such as motor control, angular position measurement, velocity measurement, and linear position measurement. It is also used in printing machines, packaging machines, tracking systems, fluid control systems, and other automated systems.
The AEDS-9140-G00 encoder has become very popular due to its high accuracy, low power consumption, and excellent reliability. It is also very affordable and easy to install. Therefore, it is a great choice for industrial and commercial applications.>
The specific data is subject to PDF, and the above content is for reference
OPTICAL ENCODER
ENCODER HT 3CH 512CPR 11MM
ENCODER DGTL 2CH150LPI BENT LD
ENCODER KIT 3CH INCREMENT 400CPR
ENCODER MECH 15-PULSE 30-DETENT
ENCODER ROTARY 1000PPR 9V