AEE03B36-LHS

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC to DC converters are a type of technology that changes the voltage level of a signal from one direct current level to another. This is done using a process called switching, which is the notion of switching between one output current and one or more input currents. AEE03B36-LHS is a great example of a DC to DC converter, and its application and working principle deserve closer inspection.

At a basic level, the AEE03B36-LHS is a buck-boost DC-to-DC converter which takes in an input voltage, and then output the converted voltage, regulating it to a different DC voltage. This converter has a maximum output current of 3.6A with an input voltage range from 3V to 40V. The AEE03B36-LHS has an output voltage range of 0.9V to 28V, with a minimum efficiency of 80%.

The AEE03B36-LHS is used in various applications and industries. It is typically used in automotive, industrial, and consumer markets. It can be used to regulate the voltage of an array of components, from batteries, motors, and switches, to more complex automated control systems.

The AEE03B36-LHS has a few key components that make it work. The main component is the switch, which is a semiconductor switch used to control the current flow. This switch is composed of two switches in parallel - a transistor switch and a diode switch. The transistor switch acts as a conductor of current when turned on, while the diode switch impedes current when turned on.

Another key component of the AEE03B36-LHS is the DC/DC converter. This converter is used to make the conversion from one voltage to another. It consists of an inductor, two capacitors, and some resistors.

The inductor stores energy and provides a smooth transfer from the source voltage to the load voltage. The capacitors act as a filter, removing voltage ripple from the circuit. The resistors are used to set the load voltage.

The AEE03B36-LHS operates based on the principle of pulse width modulation (PWM). In this technique, the power is switched on and off at a certain frequency, with longer on times increasing the total energy delivered to the load. The switching frequency is typically 20kHz.

At the higher end, the AEE03B36-LHS is designed to be used for synchronous rectification. This technique is used to further increase efficiency. In synchronous rectification, each switch in the circuit is turned on and off in sequence to create a continuous current flow.

Overall, the AEE03B36-LHS is an excellent example of a DC-to-DC converter. Its application and working principle make it suitable for a variety of uses, from automotive and industrial to consumer applications. With its high efficiency, this converter is ideal for high-current applications that require a regulated voltage.

The specific data is subject to PDF, and the above content is for reference