AF164-JR-0722RL

Number of Pins:	8
Height - Seated (Max):	0.028" (0.70mm)
Size / Dimension:	0.126" L x 0.063" W (3.20mm x 1.60mm)
Supplier Device Package:	1206
Package / Case:	1206 (3216 Metric), Convex, Long Side Terminals
Mounting Type:	Surface Mount
Applications:	DDRAM, SDRAM
Operating Temperature:	-55°C ~ 155°C
Temperature Coefficient:	±250ppm/°C
Power Per Element:	62.5mW
Series:	AF164
Resistor-Ratio-Drift:	--
Resistor Matching Ratio:	--
Number of Resistors:	4
Tolerance:	±5%
Resistance (Ohms):	22
Circuit Type:	Isolated
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor Networks, Arrays

Resistor networks, also known as resistor arrays, are electronic components that consist of multiple resistors connected together. These networks, when properly wired, can act as voltage dividers, current limiters, signal conditioners, or signal attenuators. The AF164-JR-0722RL is an example of a resistor network.The AF164-JR-0722RL is a four-terminal resistor network. It consists of four resistors connected in series, with one resistor bridge that connects the two end resistors together. The resistance of the network is determined by the value of each resistor in the network. The total resistance of the network is the sum of the resistances of the four resistors.The AF164-JR-0722RL resistor network can be used as a potential divider to divide the applied voltage between the two terminals. The network is connected between two voltage supplies, and the resistance of each resistor is adjusted to determine the division ratio. By adjusting the resistance values, the current flowing through the resistor network can be controlled.The AF164-JR-0722RL can also be used as a signal conditioning circuit. A signal conditioning circuit is used to adjust the gain and the frequency response of an electronic signal. It can be used to filter out unwanted frequencies, amplify desired frequencies, or adjust the gain of the signal.In addition, the AF164-JR-0722RL can be used as a current limiter. Current limiter circuits are used to limit the current that can flow through a circuit. This is done by setting the resistance of the resistor network to a value that allows the desired current to flow through the network, while limiting the maximum current that can flow through the circuit.The AF164-JR-0722RL resistor network can also be used as a signal attenuator. A signal attenuator is a circuit that is used to attenuate, or decrease, the amplitude of a signal. The resistance of the resistor network is adjusted to decrease the gain of the signal, while still allowing it to pass through the network.Overall, the AF164-JR-0722RL is a versatile resistor network that can be used for a variety of applications. It can be used as a voltage divider, current limiter, signal conditioner, or signal attenuator. It is a cost-effective and easy to use resistor network that can be used in a variety of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description