AFFC-050-40-153-11

Series:	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Cable Type:	FFC, FPC
Moisture Sensitivity Level (MSL):	--
Number of Conductors:	40
Pitch:	0.020" (0.50mm)
Length:	6.000" (152.40mm)
Length - Exposed Ends:	0.138" (3.50mm)
Termination Style:	Top on Both Sides, Backers on Both Sides

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Flat Flex, Ribbon Jumper Cables

AFFC-050-40-153-11 Flat Flex, Ribbon Jumper Cables are the versatile connector choice for a wide variety of applications. Flat flex cables are often used in medical or automotive industries, as well as in circuit boards or printed circuit board (PCB) designs. They provide flexibility and convenience when connecting components, as they can be routed in tight or hard-to-reach spaces.The AFFC-050-40-153-11 connector is a flat flex cable that is 50mm wide, 153mm long, 40mm wide on the pin side, and 11mm wide on the connect side. It is typically available in both 2-pin and 10-pin variants, with the 10-pin being the most common. The connector is composed of two layers of flexible silicon-based material with conductive areas that are separated by a thin dielectric layer. This design provides improved mechanical performance and flexible routing options.The primary application of the AFFC-050-40-153-11 connector is in connecting two or more printed circuit boards (PCBs). It is commonly used when the boards are tightly spaced or in hard-to-reach spaces, where other connectors may be bulky or non-compliant. The flat flex cables are also widely used in applications where a thin, flexible cable is needed, such as in medical devices or on automated production lines.The working principle of the AFFC-050-40-153-11 Flat Flex, Ribbon Jumper Cable lies in its construction. The two layers of the cable are connected via lightly twisted metallic wires that run inside the channels of the cable. These wires transfer the electrical signal flowing through the cable. The outer shells of the cable are usually made of PVC or rubber; they serve to protect the wires from environmental hazards, while allowing the cable to maintain its flexibility.The AFFC-050-40-153-11 Flat Flex, Ribbon Jumper Cable is designed to provide reliable and efficient signal transfer over short distances. The connector is typically used where two circuits must be bridged without making any direct electrical contact. This characteristic makes the flat flex cable ideal for connecting components that are in close proximity, such as in circuit boards, automotive consoles, medical instruments, and other applications where space is a concern.Despite their small size, the AFFC-050-40-153-11 Flat Flex, Ribbon Jumper Cable connectors provide strong electrical performance backed by an impressive durability. The connector is designed to withstand multiple cycles of flexing without losing its mechanical integrity or experiencing any degradation in performance. Furthermore, these connectors are resistant to corrosion, moisture, and vibration, making them ideal for a range of industrial, medical and automotive applications.The AFFC-050-40-153-11 Flat Flex, Ribbon Jumper Cables are available in a variety of options, including 2-pin and 10-pin variants, and two colors (black and brown). They are suitable for a variety of applications, from printed circuit board (PCB) designs to medical or automotive applications. Furthermore, they provide strong electrical performance and enhanced flexibility for reliable signal transfer, making them an ideal connector choice for a wide range of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description