AGC-8/10-R

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fuses are a vital part of electrical safety and many people are familiar with the small boxes of fuses found in most homes. The AGC-8/10-R fuse is a unique type of fuse for industrial use, with an application field and working principle that differ significantly from common residential fuses.

The AGC-8/10-R is primarily designed for use as a fuse block in industrial power distribution systems. It is a high-voltage, single-phase, and three-wire fuse that provides protection for electric equipment from the damaging effects of short-circuit and overload currents. This type of fuse is commonly used in applications such as medical device power supplies, commercial and industrial power supplies, and motor-protection controls. It is also suitable for use in hazardous-location installations, such as Class 1, Division 2 and Class 2, Division 2 service locations.

The AGC-8/10-R has a 300-volt range, meaning that it can be used to protect equipment operating with up to 300 volts between conductors. It can also be used to protect systems operating with higher voltages, but requires the addition of an appropriate voltage-rating adapter.

While the AGC-8/10-R is primarily designed for use as a fuse block, it can also be used as a stand-alone fuse or an in-line fuse, depending on the particular application required. It is a time-delay-type fuse, meaning that it has a longer delay time before it trips in response to an overload or short circuit. This allows for a small amount of additional current during the time that it takes for the fuse to operate, which can help protect equipment from damage.

The AGC-8/10-R is designed to work by using its internal components, voltage-rating adapters, and external connections to detect faults in the power supply. When a fault is detected, the fuse will first send an internal signal to start the process of clearing the fault. This is done by allowing a small amount of electrical current to flow through the fuse, which will cause it to heat up. As the temperature rises, the internal components will expand, which will then interrupt the flow of current and trigger the fuse to trip.

The AGC-8/10-R fuse is an excellent choice for protecting electrical systems operating at up to 300 volts. It is a time-delay-type fuse, allowing for protection of equipment from short circuits and overloads. It can be used as a fuse block, stand-alone fuse, or in-line fuse, depending on the particular application. Additionally, its internal components and external connections enable it to detect faults in the power supply and trip when necessary. With its wide application field and reliable working principle, the AGC-8/10-R is the ideal solution for many industrial power supply protection requirements.

The specific data is subject to PDF, and the above content is for reference