AGC-V-6-R

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fuses are an integral part of any electrical system. Without a fuse in place, the current in an electrical circuit could overload the system leading to a fire or other electrical hazard. The AGC-V-6-R is a fast-acting fuse designed for circuits carrying high current, typically those found in industrial applications. It has been designed to prevent overloads, short-circuits, and interrupting the flow of current should a fault be detected.

The AGC-V-6-R is a very fast-acting fuse with a very short melting time. It is capable of quickly melting and breaking an overload or short circuit current. The fuse is designed for use with electrical systems operating at 690VAC or less, with a maximum current of 100A. It is not designed to be used in higher than 690VAC circuits, and doing so can cause serious damage.

The AGC-V-6-R is typically used in low voltage circuits, such as appliances, industrial equipment, and HVAC systems. It is also suitable for use in residential circuits for protection against overloads and short-circuits. The fuse will begin to arc when the current reaches its rated limit of 100A and will quickly blow before the current reaches the circuit’s maximum rating. The AGC-V-6-R is designed to be very fast, reacting in as little as 10 milliseconds in the event of a fault.

The working principle of the AGC-V-6-R is based on the ohmic resistance characteristics of the fuse element. When the current exceeds the rated current level of the fuse, the ohmic resistance increases, resulting in a rapid increase in temperature. This temperature rise causes the fuse element to melt and separate, instantly interrupting the current flow. The melted portion of the element expands, creating an arc between the two contacts of the fuse element and further increasing the resistance of the element, effectually isolating the circuit.

The AGC-V-6-R is designed to protect electrical circuits from overloads, short-circuits, and excessive current flow. It is not designed for use as a motor overload protection device, and should not be used as such. The fuse must be correctly sized for the application, and the manufacturer’s instructions should be followed for proper installation. The AGC-V-6-R is designed for use in industrial applications, and can provide reliable and fast-acting protection to ensure the safety of personnel and equipment in the event of a fault.

The specific data is subject to PDF, and the above content is for reference