AGX-3/16

Fuses protect circuits from over current, helping to prevent equipment damage and costly downtime. A fuse works by providing a controlled path for the flow of electricity at a rate determined by its design. The AGX-3/16 is a fast-acting fuse with a standard voltage of 600 VAC.

AGX-3/16 Application Field

The AGX-3/16 is suitable for a wide variety of applications, such as motor control, panel protection, HVAC and industrial equipment. It is listed by Underwriters Laboratories (UL) and meets the requirements of the National Electrical Code (NEC) for overcurrent protection up to 500 VAC.

Working Principle of AGX-3/16 Fuse

The working principle of the AGX-3/16 is based on temperature. This fuse has a special alloy conductor that is designed to melt quickly when it is exposed to excessive heat. When too much current flows through the fuse, the heat caused by the current causes the alloy conductor to melt and open the circuit.

The AGX-3/16 is a fast-acting fuse, meaning that it will open very quickly when exposed to an overload, protecting the circuit from further damage. It is important to note that this fuse is designed to operate in a single-bolt installation in a suitable junction box. This fuse must not be used in other types of installation.

Advantages of AGX-3/16 Fuse

The AGX-3/16 has a number of advantages over other fuses. Firstly, it is fast-acting, meaning that it quickly opens when subject to an overload, limiting the damage to the circuit and reducing the risk of fire. Secondly, it is UL and NEC-compliant, meaning that it can be used in most environments without the need for additional approval. Thirdly, it is ECO-friendly, meaning that it will not create any fumes or smoke when it opens. Finally, it is very affordable, making it a good choice for most applications.

AGX-3/16 Fuse Sizing and Selection

When selecting the AGX-3/16, it is important to make sure that it is the correct size for the application. The fuse should have a rating that is slightly lower than the full-load current of the application. Over-sizing the fuse can lead to excessive current passing through the fuse and reduce the effectiveness of the protection. Furthermore, it is important to make sure that the fuse is compatible with the voltage of the application.

In addition, it is important to make sure that the fuse is capable of handling the inrush current of the application, as the inrush current is typically higher than the full-load current of the application. The fuse should be capable of handling the peak current of the application for a short period of time.

Conclusion

The AGX-3/16 is a fast-acting fuse suitable for many applications. It is UL and NEC-compliant and ECO-friendly, making it a good choice for most applications. However, it is important to make sure that the fuse is the correct size and is compatible with the voltage of the application to ensure its optimal performance.