AIAP-01-271K-T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed inductors are active components frequently used in electronic circuits for applications such as filtering and signal coupling. The AIAP-01-271K-T is a form of fixed inductor designed for specific applications and is composed of an encapsulated inductor with a container providing input and output pins for power and signal transference. This fixed inductor is relatively small in size, measuring in at just 17.5 by 32.5 millimeters.

The construction of this inductor is composed of multiple layers of electrically conductor wire winding, tightly wound and then protected from external influences by the epoxy resin/plastic encapsulation. Each winding is configured in a specific configuration to create an inductor with a specific reactance or impedance at certain frequency ranges. The most common configuration of winding is known as a solenoid, in which the wire is wound around a ferrous core to create balanced inductance.

The AIAP-01-271K-T contains two pins; one predominantly used for power and a second used for signal transference. The power pin carries the required power for the inductor to operate properly, while the signal pin is used to transfer the wave signal that is necessary for operation. It is important to note that the rating of the inductor will depend greatly on the power and signal pins; if the input and measured output differ, then the inductor may become damaged.

The working principle of a fixed inductor is quite simple and relies on Faraday’s law of induction. This law states that whenever a flux of magnetic fields is present near a conductor, then an electric current will be induced into the conductor. The AIAP-01-271K-T uses this principle in combination with its winding configuration to create a desired reactance or impedance at a certain frequency range. The exact reactance and impedance will depend on the properties of the material being used in the inductor and the configuration of the winding.

The AIAP-01-271K-T is designed for use in specific types of applications, such as filtering and signal coupling. It can be used to filter out high and low frequency signals in order to protect other components on the circuit board from damage. It can also be used to couple signals and transfer them from one circuit board to another. The inductor is suitable for use in several consumer and professional grade electronics, such as medical imaging equipment, computers, and augmented reality devices.

In conclusion, the AIAP-01-271K-T fixed inductor is an efficient and reliable active component that utilizes Faraday’s law of induction in order to create the required reactance and impedance for specific applications. This inductor is small in size and is suitable for use in several consumer and professional grade electronics, such as medical imaging equipment, computers, and augmented reality devices.

The specific data is subject to PDF, and the above content is for reference