AIRD-06-330K

DC Resistance (DCR):	29 mOhm Max
Height - Seated (Max):	0.827" (21.00mm)
Size / Dimension:	0.827" Dia (21.00mm)
Supplier Device Package:	--
Package / Case:	Radial
Mounting Type:	Through Hole
Inductance Frequency - Test:	1kHz
Operating Temperature:	-25°C ~ 85°C
Ratings:	--
Frequency - Self Resonant:	--
Q @ Freq:	15 @ 50kHz
Series:	AIRD-06
Shielding:	Unshielded
Current - Saturation:	18.6A
Current Rating:	5.5A
Tolerance:	±10%
Inductance:	33µH
Material - Core:	Ferrite
Type:	Wirewound
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed Inductors

Fixed Inductors are electrical components that store energy in the form of a magnetic field. Commonly used in circuit design, these components are used to create a current or a voltage difference between two parts of the circuit. The AIRD-06-330K is a particularly useful component found in a wide variety of applications.The AIRD-06-330K consists of two parts; a core made from a ferrite material, and a coil that consists of about 120 turns of wire. This coil stores energy in the form of a magnetic field when current passes through the coil. When the current is reversed, the magnetic field created by the coil collapses and releases the stored energy, allowing the potential energy to be used.The AIRD-06-330K can be used to build inductors in a variety of applications, including audio circuits, radio frequency amplifiers, switching power converters, filters, and transformers. Because of its compact size, low component count, and low-cost, the AIRD-06-330K is a popular choice for circuit design. The most common use of the AIRD-06-330K is to filter out unwanted signals in electrical circuits. The inductors built using the component are used to create a high-pass or low-pass filter. These filters can be used to eliminate noise from a signal, allowing it to remain free from interference.Inductors built using the AIRD-06-330K component can also be used to produce voltage and current transformations. By connecting an inductor in series, engineers can change the voltage of a signal. This technique can be used to increase or decrease the voltage as desired. Similarly, inductors can be configured in parallel to provide a current transformation, allowing for the various current demands of components to be met.In addition to these uses, the AIRD-06-330K can be used to create inductors that act as a bridge component between two parts of the circuit. By connecting a coil between two points, the two points will communicate with each other in an AC manner. This can be used to allow signals to be transmitted through a series of particles or circuits without interference. All in all, the AIRD-06-330K component is an essential part of circuit design. Its small size and low cost make it a popular choice for a variety of applications. With its use, engineers can create high-pass and low-pass filters, voltage and current transformations, and bridges between two points. In short, the AIRD-06-330K is an essential part of circuit design.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description