AISC-1008-1R2G-T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed inductors are electrical components that store energy in a magnetic field and thereby produce a current or voltage change, depending on their working principle. A fixed inductor is basically a coil of wire surrounding a core. When a current passes through the coil, it creates a magnetic field around the core and induces a voltage across the terminals of the coil. The inductance, represented by L in Ohms (Ω), is the amount of induced voltage that occurs for a given current.

The AISC-1008-1R2G-T fixed inductor is a component used in many applications for storing energy that must be changed in magnitude or direction. This inductor, like many others, has two terminals, one positive and one negative. The negative is often referred to as the return and the inductor\'s core is located in the center of the winding wire. The core material, usually made of iron or steel, determines the inductance of the inductor.

One of the main applications of fixed inductors, like the AISC-1008-1R2G-T, is in power electronics. In power electronics, the inductor is used as a filtering device. This involves passing a signal, in either alternating current (AC) or direct current (DC), through the coil. The alternating current creates a magnetic flux in the core that induces a voltage and current change in the circuit. This change in voltage and current can add or reduce noise, reduce ripple in the supply voltage, and limit the current fluctuation in the circuit according to the application.

The AISC-1008-1R2G-T inductor is also used as a transformational device. An example of this is a voltage regulator where it can be used to increase or decrease the voltage with respect to current. This is achieved by passing an AC current through the inductor. The core stores energy in the form of a magnetic field under an increment of voltage and releases it in a decrement of voltage at a later time.

The inductor design and the core material affect the inductor\'s performance. For instance, the turns of the coil, its diameter and shape, as well as the core size and material all affect the inductance of the inductor. The actual inductance is dependent on these variables and is usually measured in Henrys (H). The AISC-1008-1R2G-T has a specified inductance of 0.87 microH (mH). The inductance is also linked to the resistance, which in this case is 1.2Ω. The resistance limits the maximum current that can pass through the inductor, and prevents the coil from producing unwanted side-effects.

In general, fixed inductors can be used in applications such as frequency filtering, impedance matching, gain control, over-voltage protection, and so on. The AISC-1008-1R2G-T has higher power capabilities compared to other inductors and can be used in high-end applications, such as low noise amplifiers. Finally, the AISC-1008-1R2G-T is a good choice for applications where space constraints are a concern, as it takes up very little space.

The specific data is subject to PDF, and the above content is for reference