ALSR05125R0JE12

Series:	ALSR
Packaging:	Bulk
Part Status:	Active
Resistance:	125 Ohms
Tolerance:	±5%
Power (Watts):	5W
Composition:	Wirewound
Features:	Moisture Resistant
Temperature Coefficient:	±30ppm/°C
Operating Temperature:	-65°C ~ 250°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.312" Dia x 0.875" L (7.92mm x 22.23mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors The ALSR05125R0JE12 is an through hole resistor that is used in various industry applications and electronic circuits. It is available in several different sizes and styles, including angular and radial types, to accommodate a wide range of designs. The ALSR05125R0JE12 has a wide range of resistance values (5 to 125 ohms), allowing it to be used in virtually any electronic device.The ALSR05125R0JE12 is a thick film resistor. It is made by applying a thin metal layer onto a substrate. The thick film resistor is also known as a high resistance layer-type resistor. The layer-type resistor has a lower resistance value than a thin film resistor. The primary advantages of using layer-type resistors for high-frequency applications are their low noise characteristics and better temperature stability. One of the most common applications for the ALSR05125R0JE12 is as part of power supplies and inverters. In this application, the resistor is used to regulate the flow of current from the power supply and prevent damaging spikes from occurring. In addition, the resistor is used to protect sensitive electronic components from accidental over-currents. Another application of the ALSR05125R0JE12 is as part of voltage regulator circuits. Voltage regulator circuits are used to regulate the voltage applied to electronic components. The resistor is used to limit the current flow and protect the device from extreme voltages. It can also be used to regulate the current in a power supply. The working principle behind through hole resistors is quite simple. The resistor is made up of several components: a conductor, an insulator, and a resistor. The conductor is made of a material that is an electrical conductor. The insulator is made from a material that is an electrical insulator. The resistor is typically made from a metal alloy. When an electrical current is applied to the conductor, the current flows along the conductor, across the insulator, and through the resistor. The resistance of the resistor determines the amount of current that is allowed to flow. By varying the resistance, the current flow can be controlled and regulated. Through hole resistors are widely used in a variety of industries, including automotive, telecommunications, medical and aerospace. The ALSR05125R0JE12 resistor specifically is used for high-frequency and high-power applications, where its low noise and temperature stability are particularly advantageous. The resistor is well-suited for use in power sources, voltage regulator circuits, and other electronic devices.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description