ALSR10300R0FE12

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are a type of resistor which is defined by a cylindrical construction with leads running along the length of the cylindrical body and soldered to the circuit board at either side. The construction of this type of resistor forms an electrical bridge of resistance known as a resistor element. In general, these types of resistors will have a higher power rating than surface-mount components, enabling them to handle higher levels of energy without becoming damaged or degraded.

The ALSR10300R0FE12 is one of these Through Hole Resistors and is an axial lead, radial leaded, 12 watt, 300 ohm resistor. It also features a direct current rating of 6 and an alternating current rating of 14 watts. These resistors are used to help limit or divert the flow of electrical current under specific conditions in order to effectively regulate voltage levels in a circuit. These resistors are also ideal for applications where power dissipation is a factor.

The working principle behind the ALSR10300R0FE12 is simple. The resistor element displays a set resistance between two leads, one at either end of the resistor. This resistance value, measured in Ohms, will determine the current that can move through the resistor, based on the circuit’s voltage. As the voltage increases, the current rises, meaning more of the current energy is dissipated as heat, and less reaches its intended target.

This resistance, or Ohm rating, will be determined by the length of the resistor element, its diameter, its temperature rating, its moisture resistance level, and its number of turns. The varying resistance levels of the resistor also allow it to be used in a number of different applications - from audio control to voltage reduction. Furthermore, the resistor will remain effective and accurate over a wide temperature range.

The ALSR10300R0FE12 is most commonly employed in order to decrease voltage levels in a circuit, while maintaining consistency throughout. It is well suited to heating applications, such as tube amplifiers and even power generators, with its higher power rating providing additional stability when compared to other types of resistors. The 12 watt rating means that higher wattage levels will not generate significant temperature changes, allowing the resistor to function as the circuit requires with minimal upkeep.

As long as the correct type of resistor is selected for the intended application and used correctly in the circuit, then Through Hole Resistors such as the ALSR10300R0FE12 will provide an effective voltage reduction solution. Its durability and long-term reliability mean that it will be a reliable component in any circuit, providing functionality for as long as it is needed.

The specific data is subject to PDF, and the above content is for reference