Allicdata Part #: | AM-13.560MENQ-T-ND |
Manufacturer Part#: |
AM-13.560MENQ-T |
Price: | $ 0.32 |
Product Category: | Crystals, Oscillators, Resonators |
Manufacturer: | TXC Corporation |
Short Description: | CRYSTAL 13.560MHZ 10PF SMD |
More Detail: | 13.56MHz ±10ppm Crystal 10pF 100 Ohms 4-SMD, No Le... |
DataSheet: | AM-13.560MENQ-T Datasheet/PDF |
Quantity: | 1000 |
3000 +: | $ 0.29232 |
Series: | AM |
Packaging: | Tape & Reel (TR) |
Part Status: | Active |
Type: | MHz Crystal |
Frequency: | 13.56MHz |
Frequency Stability: | ±50ppm |
Frequency Tolerance: | ±10ppm |
Load Capacitance: | 10pF |
ESR (Equivalent Series Resistance): | 100 Ohms |
Operating Mode: | Fundamental |
Operating Temperature: | -40°C ~ 125°C |
Ratings: | AEC-Q200 |
Mounting Type: | Surface Mount |
Package / Case: | 4-SMD, No Lead |
Size / Dimension: | 0.126" L x 0.098" W (3.20mm x 2.50mm) |
Height - Seated (Max): | 0.032" (0.80mm) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Crystals play an important role in modern technology. Without them, many of the electronic devices that we use today would not be possible. The AM-13.560MENQ-T is one such crystal, which is specially designed to work in applications involving high frequencies. In this article, we will discuss the applications of the AM-13.560MENQ-T and its working principle.
The AM-13.560MENQ-T is a high frequency crystal oscillator, designed for applications that require a frequency of 13.56 MHz. Its size is much smaller than most standard crystal oscillators, measuring just 3.2 x 2.5 mm in size. This makes it suitable for use in many small and portable devices. It is also used in several different applications, such as RFID tags and readers, smart cards, contactless payment systems, and security access systems.
In terms of its working principle, the AM-13.560MENQ-T crystal oscillator works by vibrating a quartz crystal at a very precise frequency. The quartz crystal is generally rectangular in shape, and consists of two plates of quartz crystal cut at a specific angle. When an electrical current is applied to the crystal, it begins to vibrate at a very specific frequency and the oscillator generates a signal at this frequency.
The quartz crystal is specially designed to oscillate at a very specific frequency. This is accomplished by raising or lowering the angle of the two plates of quartz with respect to each other. This results in the quartz being optimized for a single specific frequency, and thus the oscillator generates a signal at that specific frequency. The stability and accuracy of the signal is thus dependant on the quality of the quartz crystal used in the oscillator.
The output from the AM-13.560MENQ-T crystal oscillator is relatively low, only around 4-5 mW. This makes it ideal for applications where the low power consumption is a concern. It is also highly accurate and stable, making it suitable for use in applications where signal fidelity is required. Furthermore, it has a good signal-to-noise ratio, making it suitable for applications where a good signal is required, such as in security systems.
In conclusion, we can see that the AM-13.560MENQ-T is a highly specialized crystal oscillator, specifically designed for applications involving high frequencies. Its small size and low power consumption make it suitable for use in portable and small devices, while its high accuracy and signal-to-noise ratio make it suitable for use in applications that require a reliable signal. All of these attributes make it an ideal choice for many different types of applications.
The specific data is subject to PDF, and the above content is for reference
Crystal 8.59MHz 39pF 3-Pin CSMD T/R - Ta...
CRYSTAL 52.000 MHZ 12PF SMT52MHz 15ppm C...
CRYSTAL 50.000 MHZ 8PF SMT50MHz 15ppm Cr...
CRYSTAL 48.000 MHZ 8PF SMT48MHz 20ppm Cr...
CRYSTAL 44.000 MHZ 6PF SMT44MHz 20ppm Cr...
CRYSTAL 40.610 MHZ SERIES SMT40.61MHz 15...