Allicdata Part #: | ANT-1.4-CW-HWR-SMA-ND |
Manufacturer Part#: |
ANT-1.4-CW-HWR-SMA |
Price: | $ 7.20 |
Product Category: | RF/IF and RFID |
Manufacturer: | Linx Technologies Inc. |
Short Description: | ANT 1.4GHZ 1/2WAVE WHIP SWVL SMA |
More Detail: | 1.4GHz Whip, Tilt RF Antenna 1.35GHz ~ 1.45GHz 2.... |
DataSheet: | ANT-1.4-CW-HWR-SMA Datasheet/PDF |
Quantity: | 48 |
1 +: | $ 6.54570 |
25 +: | $ 6.05430 |
100 +: | $ 5.88924 |
VSWR: | 2 |
Applications: | -- |
Height (Max): | 5.591" (142.00mm) |
Mounting Type: | Connector Mount |
Ingress Protection: | -- |
Termination: | Connector, SMA Male |
Features: | -- |
Gain: | 2.4dBi |
Return Loss: | -- |
Series: | HWR |
Number of Bands: | 1 |
Antenna Type: | Whip, Tilt |
Frequency Range: | 1.35GHz ~ 1.45GHz |
Frequency (Center/Band): | 1.4GHz |
Frequency Group: | UHF (1 GHz ~ 2 GHz) |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
RF antennas refer to antennas that convert electric signals into electromagnetic radiation and radiation waves into electric signals. ANT-1.4-CW-HWR-SMA is one of the RF antennas.
The ANT-1.4-CW-HWR-SMA is an omni-directional antenna with four main components: a Low-Noise Amplifier (LNA), a Housing Connector (HWR), a Printed Circuit Board assembly (PCB) and a pair of coaxial cables. The antenna is designed to be used in communications applications where a stable signal is required such as in microwave engineering, satellite communications and point-to-point data links.
The ANT-1.4-CW-HWR-SMA antenna mainly uses the process of dielectric resonance to achieve the radiolocation. This coupling method converts the radio waves into electric waves which can be received and processed by the LNA. The signal from the LNA is then delivered to the PCB through the HWR and into the coaxial cable with minimal loss.
The PCB is the active device in the antenna and provides electronic components and technology to match the impedance between the antenna and the transmitter or receiver. It receives the radio frequency energy from the HWR and boosts the electrical power of the signal before passing it to the transmitter or receiver. It also makes the antenna more efficient by suppressing noise and other unwanted signals.
The LNA acts as an amplifier for the signal being received or transmitted by the antenna. This is an important factor in how well the antenna will perform, as the LNA helps reduce the received signal-to-noise ratio (SNR). The signal passes through the LNA, which amplifies it before it is sent to the transmitter or receiver. The LNA can also prevent unwanted noise from entering the system, as it is designed to filter out non-essential signals.
The ANT-1.4-CW-HWR-SMA antenna is designed for a variety of applications, including radar, radio broadcast, telecom base stations, Wi-Fi/Bluetooth, GPS receivers, and LTE radios. The antenna can be used in a wide range of environments, including vehicle, air, and land, as well as in marine, aviation and military purposes. The antenna has a robust design and is suitable for use in challenging conditions.
The ANT-1.4-CW-HWR-SMA antenna is an ideal choice for a variety of applications requiring an omni-directional antenna. It is designed to provide superior performance at a wide range of frequencies, and can be used in a wide range of environments. Its low-noise design ensures minimal signal loss while providing reliable performance. It is a versatile antenna that is suitable for both transmission and reception.
The specific data is subject to PDF, and the above content is for reference
ANTENNARF Antenna
ANTENNA SATELLITE 1620MHZRF Antenna
ANT SQUINT WIDE BAND RP SMA5.5GHz Panel...
RADOME OMNI 6DBI 2.4MHZ FEMALE2.4GHz Wh...
ANTENNA 2.4GHZ SMA2.4GHz WLAN Dome RF An...
ANTENNA 2.4GHZ DIPOLE 2DBI 10PC2.4GHz Wi...