ANT-ELE-S01-011

VSWR:	2
Applications:	--
Height (Max):	1.020" (25.91mm)
Mounting Type:	Magnetic
Ingress Protection:	--
Termination:	Connector, M5
Features:	--
Gain:	--
Return Loss:	--
Series:	MAG
Number of Bands:	1
Antenna Type:	Dome
Frequency Range:	2.4GHz ~ 2.5GHz
Frequency (Center/Band):	2.4GHz
Frequency Group:	UHF (2 GHz ~ 3 GHz)
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction RF antennas are electro-magnetic devices used to generate and receive signals, providing communication between two or more devices. They can be either transmitters or receivers, depending on the direction of propagation of the signal. ANT-ELE-S01-011 is a type of RF antenna, designed to enable reliable and efficient transmission of data between two or more remote points. This article will discuss the application field and working principle of ANT-ELE-S01-011 RF antenna. Application Field ANT-ELE-S01-011 RF antenna is designed to be used in a variety of communication applications, including point-to-point (PTP) communications, point-to-multipoint (PMP), and general purpose wireless LANs. It is ideal for both short- and long-range transmissions, and is suitable for indoor as well as outdoor use.PTP applications include wireless backhaul networks for wireless services such as Wi-Fi hotspots, mobile broadband, and video surveillance. In PMP applications, the antenna is typically used in wireless mesh networks for WiFi coverage and other public access networks. In general purpose wireless LANs, ANT-ELE-S01-011 RF antenna is used to provide wide area coverage for broadband internet, VoIP applications, and both corporate and consumer networks. Working Principle The ANT-ELE-S01-011 RF antenna has two parts: the transmitter and the receiver. The transmitter is responsible for sending out the data signal using radiofrequency waves, while the receiver is responsible for receiving the signal from the source.When the transmitter is activated, it emits radiofrequency waves that propagate through space, reaching the receiver. Once these radiofrequency waves reach the receiver, they are converted into electrical signals (digital or analog, depending on the type of data). This signal is then transmitted via a coaxial cable or other medium to the destination.To ensure good reception of data, the ANT-ELE-S01-011 RF antenna has a directional gain pattern. This directional gain pattern focuses the transmitted signal in one direction, allowing for a higher power and therefore longer range of the signal. Conclusion ANT-ELE-S01-011 RF antenna is designed for reliable transmission of data in a variety of applications, including point-to-point (PTP) communications, point-to-multipoint (PMP), and general purpose wireless LANs. Its directional gain pattern allows for a higher output power and therefore longer range of the signal, making it ideal for both short- and long-range transmissions.

The specific data is subject to PDF, and the above content is for reference