AOCJY2-10.000MHZ

Frequency Stability:	±5ppb
Current - Supply (Disable) (Max):	--
Height - Seated (Max):	0.433" (11.00mm)
Size / Dimension:	0.827" L x 0.827" W (21.00mm x 21.00mm)
Package / Case:	6-DIP (0.600", 15.24mm), 5 Leads
Mounting Type:	Through Hole
Ratings:	--
Current - Supply (Max):	--
Operating Temperature:	0°C ~ 50°C
Series:	AOCJY2
Voltage - Supply:	3.3V
Output:	CMOS
Function:	Standby (Power Down)
Frequency:	10MHz
Type:	OCXO
Part Status:	Active
Packaging:	Tray

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators

An oscillator is an electronic device that creates a continuous signal with a specific frequency, phase, and amplitude. The AOCJY2-10.000MHZ is a high frequency oscillator that is often used for wireless communications or high-speed data acquisition. This oscillator is made up of a Feedback Circuit, an Amplifier, a Voltage Controlled Oscillator, a Crystal Oscillator, and a Resonator.

Feedback circuit

The Feedback Circuit is what provides the oscillator with its frequency and stability. This is achieved through the use of an amplifier as well as a voltage controlled oscillator (VCO). The amplifier takes in the input signal and amplifies it to the desired output voltage. The VCO is then used to adjust the frequency and amplitude of the signal.

Crystal oscillator

The Crystal Oscillator is the key component of the AOCJY2-10.000MHZ oscillator. This utilizes a piezoelectric crystal to generate a signal with a high degree of frequency stability. The crystal oscillator will also provide the oscillator with a very accurate reference frequency.

Resonator

The Resonator is responsible for providing the oscillator with its high-frequency output. The way this works is that the crystal oscillator sends an alternating current through the resonator. This current will cause the resonator to produce its own oscillations at the desired frequency.

Application field

The AOCJY2-10.000MHZ oscillator is used in a variety of applications, such as wireless communications and high-speed data acquisition. It is also used for clock generation and timing applications, as well as for digital signal processing (DSP) applications.

Working principle

The working principle of the AOCJY2-10.000MHZ oscillator is relatively simple. It utilizes a Feedback Circuit to provide the oscillator with its frequency and stability, a Crystal Oscillator for a very accurate reference frequency, and a Resonator to produce its own oscillations at the desired frequency. The output signal is then adjusted to the desired frequency and amplitude.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description