AOCJY2-12.800MHZ-F-SW

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are electronic circuits which generate repeating waveforms. The AOCJY2-12.800MHz-F-SW oscillator is a specially designed crystal oscillator module incorporating a reverse-biased junction transistor. Its oscillating frequency is set by the crystal’s physical characteristics, which makes it suitable for highly accurate applications.

The AOCJY2-12.800MHz-F-SW oscillator has a wide range of applications, including telecommunications, GPS navigation, military applications, scientific instruments, audio frequency and video frequency circuits, and electronics in general. The module can also be used in laboratories to generate frequency signals for testing and calibration of various devices. In addition, it can be used in synchronization systems, in order to keep digital circuits in precise alignment.

The working principle of the AOCJY2-12.800MHz-F-SW oscillator is based on the fact that the voltage applied to a reverse-biased junction transistor creates a voltage feedback loop. This loop continues to oscillate at a frequency determined by the crystal, regardless of whether a load is attached or not. The center frequency of the oscillator module is determined by the crystalline arrangement of a quartz crystal. The box crystal itself is a mechanically resonant object that vibrates at a certain frequency when the required electric field is applied to its electrodes. This is then used to generate a stable oscillating signal.

The AOCJY2-12.800MHz-F-SW oscillator has a circuit design based on a Wien bridge network. The network includes two capacitors and two resistors, which form the negative feedback loop. The capacitor and series connected resistor form a high pass filter. The other capacitor and resistor form a low pass filter. By adjusting the values of the components, the center frequency of the oscillator can be adjusted to match the frequency of the crystal. The output of the oscillator module is a clean sinusoidal waveform, with very little jitter or noise.

Overall, the AOCJY2-12.800MHz-F-SW oscillator is a reliable and accurate crystal oscillator module suitable for a wide range of applications. Its frequency is set by the crystal, and the output is a clean sinusoidal waveform, with very little jitter and noise. The box crystal can also be adjusted to generate different frequencies, or even multiple frequencies, if necessary. This makes the module very versatile and suitable for use in laboratories, as well as for other applications.

The specific data is subject to PDF, and the above content is for reference