AOCJY2-13.000MHZ

Frequency Stability:	±5ppb
Current - Supply (Disable) (Max):	--
Height - Seated (Max):	0.433" (11.00mm)
Size / Dimension:	0.827" L x 0.827" W (21.00mm x 21.00mm)
Package / Case:	6-DIP (0.600", 15.24mm), 5 Leads
Mounting Type:	Through Hole
Ratings:	--
Current - Supply (Max):	--
Operating Temperature:	0°C ~ 50°C
Series:	AOCJY2
Voltage - Supply:	3.3V
Output:	CMOS
Function:	--
Frequency:	13MHz
Type:	OCXO
Base Resonator:	Crystal
Part Status:	Active
Packaging:	Tray

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators

AOCJY2-13.000MHZ application field and working principle

Oscillators are the most fundamental component in electronic as they generate repetitive electrical signals. The AOCJY2-13.000MHZ Oscillator is commonly used in areas such as automated test and measurement equipments, data communications hardware, frequency or phase modulation instruments, military application and cellular phones.The AOCJY2-13.000MHZ is an oscillator which functions as a sinusoidal wave generator. It is designed to be a low power 12.000MHZ quartz crystal unit. The AOCJY2-13.000MHZ is packaged in TO-92, 54-Lead PGA (PIN Grid Array), DIP-8 (dual in-line plastic) or SOT-23-6 package and can operate with up to 15 volts of input power.The basic working principle of the AOCJY2-13.000MHZ oscillator is simple. It consists of the series of electrical components which are positioned in a specific manner fabricated on a printed circuit board. These components are include the Quartz Crystal, amplifier, resistor and capacitor.At the core of the oscillator is the Quartz Crystal. The quartz crystal is made up of a crystal of quartz which is cut precisely and encapsulated. It is then vibrated when a voltage is applied across two electrodes connected to it. An alternating electrical current will be created when the crystal is vibrated at a frequency of 13.000MHZ.The signal from the quartz crystal is then passed on to the amplifier which amplifies the weak signal coming from the crystals. The amplifier is an important part of the oscillator as it is where the signal is adjusted and controlled to a suitable level. It is also the component that ensures that the signal is strong enough to be used for other electronic circuits.The oscillator is then regulated by the use of a resistor and capacitor. The resistor is used to increase the resistance of the signal and the capacitor is used to filter out unnecessary signals and further control the frequency. The frequency of the signal is controlled either by adjusting the value of the resistor or by changing the position of the capacitor.The AOCJY2-13.000MHz oscillator is a reliable and stable device that is capable of delivering precise and accurate frequencies. It is widely used in applications where accuracy and stability are a priority. The device is also used widely in the military, data communications and automated test and measurement equipments. The AOCJY2-13.000MHz Oscillator provides an excellent way to generate high frequency sinusoidal waveforms.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description