Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators

An oscillator is a circuit that produces oscillating signals at a certain frequency. Oscillators are used in a variety of applications, including control systems, signal processing, and radio communications. AOCJY3-10.000MHZ-F oscillator is a type of voltage controlled oscillator (VCO) that is designed to provide accurate frequency control on a chip. It is based on a phase-locked loop (PLL) circuit, which enables precise control of frequency and phase.

Application Field

The AOCJY3-10.000MHZ-F oscillator is used in many applications, including frequency synthesis, radio communications, GPS navigation systems, oscilloscope synchronization, and medical equipment. It is also commonly used in consumer electronics, such as cell phones, remote-control devices, and gaming consoles.

The oscillator can be used to generate frequencies from 0.5 MHz to 10 MHz, with an output power of up to +15 dBm. The oscillator’s low phase noise, high reliability, and small footprint make it suitable for use in compact and portable devices.

Working Principle

The AOCJY3-10.000MHZ-F oscillator is based on a PLL circuit and can be used to generate frequencies from 0.5 MHz to 10.000 MHz. The oscillator is voltage-controlled, which means the output frequency can be adjusted by changing the voltage applied to its control port. The oscillator has a starting voltage of 8 V at 100 kHz and a maximum voltage of 14 V at 10 MHz. It also has a predetermined frequency range in which it will operate.

The oscillator has an input voltage port and a feedback voltage port. The input voltage port is used to supply the power to the oscillator, whereas the feedback voltage port is used to receive the output frequency and regulate its operation. The oscillator uses an internal voltage-controlled oscillator, amplifier, and phase-detector circuit to generate the output frequency. The output is then filtered and amplified to provide the required output levels.

Conclusion

The AOCJY3-10.000MHZ-F oscillator is a voltage controlled oscillator designed to provide precise control of frequency and phase for a variety of applications. It can be used in radio communications, GPS navigation systems, oscilloscope synchronization, and consumer electronics. The oscillator is based on a PLL circuit and has a starting voltage of 8 V at 100 kHz and a maximum voltage of 14 V at 10 MHz. The oscillator also includes an input voltage port, a feedback voltage port, an internal voltage-controlled oscillator, amplifier, and phase-detector circuit.

The specific data is subject to PDF, and the above content is for reference