ASA2-33.333MHZ-L-T3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are devices used to generate, maintain, shape and control a periodic waveform. The ASA2-33.333MHZ-L-T3 is a type of oscillator that is utilized in a variety of applications, and it has a unique working principle.

Application Field

The ASA2-33.333MHZ-L-T3 oscillator is an ideal device for use in a variety of applications, such as radio frequency (RF), telecommunications, instrumentation and control. It can also be used in clock generators, phase-locked loops and pulse applications. The frequency range of this oscillator can cover a wide variety ranging from 33kHz to 33.333MHz, thus allowing it to be used for applications requiring high frequency operation.

In addition, the oscillator is also suitable for use in other areas of electronics such as audio processing, video transmissions, and telecommunications and signal conditioning. It can even be used for data communication and storage.

Working Principle

The ASA2-33.333MHZ-L-T3 is a voltage-controlled oscillator that utilizes the charge pump principle. It is a monolithic integrated circuit (IC), meaning that all of the components of the device are contained on a single semiconductor chip. The IC contains a voltage-controlled oscillator circuit, which is essentially an amplifier that is driven by a voltage signal and produces an output signal. This output signal is then filtered to produce a sine wave oscillation at the desired frequency.

The output from the IC is then fed into two capacitors, which act as frequency-determining capacitors. One of the capacitors is controlled by a voltage signal, while the other is fixed. As the voltage signal increases, the frequency of the output signal increases. The frequency of the output signal is then compared against a reference signal, and if the two signals differ, then the charge pump circuit adjusts the voltage to maintain the desired frequency.

The accuracy of the output signal is dependent on the accuracy of the reference signal. If the reference signal is not accurate then the output signal may be off frequency. To ensure accuracy, the accuracy of the reference signal must be carefully monitored.

In addition, the temperature of the device must also be kept within a certain range, otherwise the output frequency may change. This is why the ASA2-33.333MHZ-L-T3 requires a heat sink to help dissipate any excess heat that is generated during operation.

As mentioned earlier, the ASA2-33.333MHZ-L-T3 is an ideal device for use in a variety of applications, and its working principle is unique. This device utilizes the charge pump principle, which allows it to produce an output signal that is stable, accurate, and consistent in a wide variety of conditions.

The specific data is subject to PDF, and the above content is for reference