ASCO-44.000MHZ-LB-T3

Frequency Stability:	±40ppm
Current - Supply (Disable) (Max):	--
Height - Seated (Max):	0.028" (0.70mm)
Size / Dimension:	0.063" L x 0.047" W (1.60mm x 1.20mm)
Package / Case:	4-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	6mA
Operating Temperature:	-40°C ~ 85°C
Series:	ASCO
Voltage - Supply:	3.3V
Output:	CMOS
Function:	Enable/Disable
Frequency:	44MHz
Type:	XO (Standard)
Base Resonator:	Crystal
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators

Oscillators are electronic circuits which produce a repeating waveforms and are used in a wide range of applications. The most common oscillator used is the ASECO-44.000MHZ-LB-T3. This oscillator is used in many electronic applications, such as in radio transmitters, digital systems, and in cellular phones.

Application Fields of ASCO-44.000MHZ-LB-T3

The ASECO-44.000MHZ-LB-T3 oscillator can be used in a wide range of applications. It is often used in radio transmitters and cell phones. These oscillators are also used in many digital systems, such as in computers and other electronic devices. Additionally, this oscillator is used to provide the necessary signal synchronization needed in many devices, such as in digital cameras and video cameras.In addition to its uses in radio transmitters and cell phones, the ASECO-44.000MHZ-LB-T3 oscillator is also used in many security systems. This oscillator provides the necessary signal synchronization for security systems, which can then detect any unauthorized access to a particular system. Additionally, this oscillator is also used in medical devices, such as Bluetooth-enabled blood glucose monitors.

Working Principle of ASCO-44.000MHZ-LB-T3

The ASECO-44.000MHZ-LB-T3 oscillator uses a set of electrical components to produce a repeating waveform. It consists of an output transistor, a capacitor, and a resistor. The output transistor is used to turn on or off the oscillator. The capacitor and resistor are used as a feedback network, which allows the oscillator to generate the necessary signal synchronization. When the output transistor is turned on, it allows a current to flow from the capacitor to the resistor. This creates a feedback loop, which is responsible for the waveform generated by the oscillator. The frequency of the waveform is determined by the amount of feedback provided by the network. As the feedback increases, so does the frequency of the waveform. In order to maintain a constant frequency, the capacitance of the capacitor needs to be adjusted. This is done by adjusting the value of the capacitor with a variable resistor. By doing so, the oscillator is able to maintain a constant frequency.

Conclusion

The ASECO-44.000MHZ-LB-T3 oscillator is a popular oscillator for a wide range of applications. It is used in radio transmitters, cell phones, digital systems, security systems, and medical devices. This oscillator consists of an output transistor, a capacitor, and a resistor, which work together to generate a repetitive waveform. By adjusting the capacitance of the capacitor with a variable resistor, the oscillator can maintain a constant frequency.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description