ASCO1-11.2896MHZ-LB-T3

Frequency Stability:	±40ppm
Current - Supply (Disable) (Max):	--
Height - Seated (Max):	0.028" (0.70mm)
Size / Dimension:	0.063" L x 0.047" W (1.60mm x 1.20mm)
Package / Case:	4-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	3.5mA
Operating Temperature:	-40°C ~ 85°C
Series:	ASCO
Voltage - Supply:	2.5V
Output:	CMOS
Function:	Enable/Disable
Frequency:	11.2896MHz
Type:	XO (Standard)
Base Resonator:	Crystal
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Oscillators are electronic circuits that produce a continuous output signal at a specified frequency. They are commonly used for timing, signal generation, and modulation purposes. One example is the ASCO1-11.2896MHZ-LB-T3 oscillator, a precision oscillator with an output frequency of 11.2896MHz. This article will discuss the application field and working principle of the ASCO1-11.2896MHZ-LB-T3 oscillator.

Application Field

The ASCO1-11.2896MHZ-LB-T3 oscillator is a versatile oscillator with multiple applications. It is commonly used in communications systems for signal transmission or for clock synchronization, as it can produce a stable and accurate output frequency.It is also used in computer systems to generate timing signals, such as in microprocessors or RAM chips. The frequent switching between low and high frequencies makes the oscillator ideal for synchronizing data paths between digital devices.In addition, it is often used in frequency synthesisers and other radiofrequency (RF) and microwave systems to generate stable frequencies for modulation and demodulation.

Working Principle

The ASCO1-11.2896MHZ-LB-T3 oscillator is a crystal oscillator. This type of oscillator produces a sinusoidal output signal using the vibrational properties of a quartz crystal.The oscillator has an input capacitor, which is connected to the crystal. This provides an electrical bias voltage that causes the crystal to vibrate at its resonant frequency. The output is generated by an amplifier circuit which amplifies and shapes the signal before it is output to a load.The crystal helps to maintain a stable output frequency. It has an intrinsic piezoelectric property that allows it to vibrate at its own frequency in the presence of a small electric field. This allows the circuit to produce a frequency that is much higher in accuracy than can be achieved with a simple inductor-capacitor oscillator.

Conclusion

The ASCO1-11.2896MHZ-LB-T3 oscillator is a precision oscillator that is widely used in various applications such as communications, computer systems, frequency synthesisers, and RF and microwave systems. Its working principle is based on the vibrational properties of a quartz crystal, which helps to maintain a stable and accurate output frequency.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description