ASCO1-5.000MHZ-L-T3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are devices which generate electrical signals that oscillate at a variety of frequencies. An oscillator circuit consists of an amplifier, feedback network and frequency control components. The ASCO1-5.000MHZ-L-T3 oscillator is specifically designed as a low frequency oscillator for use in communication, consumer electronics, medical imaging and military applications.

The ASCO1-5.000MHZ-L-T3 has a temperature stability of ±5ppm/°C. The chip works in temperature range from -30°C to +85°C. It provides a very low jitter of 200fs (typical). The packaging of this chip is in the form of a small surface mount SIP package for easy use.

The ASCO1-5.000MHZ-L-T3 oscillator utilizes the Pierce oscillator topology. The Pierce oscillator consists of two transistors with their collector outputs coupled to the emitters with one in the inverting and one in the non-inverting loop. The circuit oscillates at frequencies determined by its components, and the frequency is controlled primarily by the feedback capacitor.

The operation of the ASCO1-5.000MHZ-L-T3 oscillator is relatively simple. The transistor in the inverting loop functions as an amplifier, while the transistor in the non-inverting loop acts as a negative feedback element. The resistors in the non-inverting loop are responsible for establishing the correct bias points in the circuit. The feedback capacitor in the non-inverting loop provides the required feedback that allows the oscillator to oscillate.

The ASCO1-5.000MHZ-L-T3 oscillator is used in a variety of applications such as modem applications, S-Meter circuits, and other low frequency oscillator designs. It is also well suited for analog-to-digital and digital-to-analog conversions, as well as for frequency division and sweep circuits. This chip can also be used to build audio and clock generator circuits. The ASCO1-5.000MHZ-L-T3 is also popular for frequency hopping and modulation schemes.

Among its features, the ASCO1-5.000MHZ-L-T3 oscillator is very robust and has excellent tolerance to environmental variations. It has a high stability and electronical noise is minimal. The oscillator produces highly symmetrical signals with low jitter and high accuracy. The chip also features a low current consumption with high clock frequency.

In conclusion, the ASCO1-5.000MHZ-L-T3 oscillator is designed to provide low frequency solutions for communication, consumer electronics, medical imaging, and military applications. It is suitable for any application that requires a robust oscillator with excellent stability and accuracy. The chip is easy to use and can be used for a variety of applications, ranging from signal generation to frequency division and sweep circuits. With its low current consumption and high clock frequency, the ASCO1-5.000MHZ-L-T3 oscillator is an excellent choice for any low frequency application.

The specific data is subject to PDF, and the above content is for reference