ASCO2-44.000MHZ-EK-T3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators

Oscillators are electronic circuits that create a recurrent alternating voltage. They are typically used to create a periodic, oscillating signal, often a sine or square wave, useful in electronics, telecommunication, and other fields. The type of oscillator used is determined by the type of signal that is desired and the amount of power available. They can be designed to operate on either direct current (DC) or alternating current (AC), and they can also have different frequency responses.

ASCO2-44.000MHZ-EK-T3 application field and working principle

ASCO2-44.000MHZ-EK-T3 is a low-frequency, high-precision crystal oscillator that can be used in a variety of radio frequency (RF) applications. The oscillator is designed to operate at a frequency range of from 25 MHz to 50 MHz and has a high level of stability between -40°C and +85°C. It utilizes a 3rd overtone crystal to achieve its high-precision characteristics, and its small size and low power consumption make it an ideal choice for RF applications.

The working principle of an oscillator is based on the equivalent circuit model of a resonator and is defined by the following equation: f = 1 / (2π √LC)

Equation (1) is the equation for the oscillation frequency that consists of two components: L represents the inductance of the resonator and C represents the capacitance. The inductance of the resonator is the inductance of the coil closest to the frequency-setting element, and the capacitance is that of the frequency-setting element near the coil. The frequency of the oscillator is determined by the value of the capacitance and inductance of this resonator.

The oscillator is designed so that, when the power supply voltage is applied, the oscillator begins to oscillate, meaning that an AC signal is generated with the same frequency as the frequency-setting point. The oscillator is designed to maintain a certain frequency over a range of temperatures, as the oscillator is designed to compensate for changes in temperature through the use of temperature control technology. The oscillator can also react to changes in the supply voltage or changes in the load conditions, allowing it to maintain its original frequency. The ASCO2-44.000MHZ-EK-T3 oscillator is designed to provide a high degree of precision and stability for the RF applications in which it is used. Its small size and low power consumption make this oscillator an ideal choice for such applications, and its design provides a high level of precision over a wide range of temperatures.

The specific data is subject to PDF, and the above content is for reference