ASEM-BLANK-LC

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Programmable oscillators refer to oscillators whose frequency and other parameters can be programmed. An ASEM blank-LC application field is a frequency-adjustable programmable oscillator that can be used in frequency synthesizers, remote radio receivers, frequency counters and channel filters. This article will discuss its working principle.

In terms of its working principle, the ASEM blank-LC application field is based on an LC oscillator circuit. This type of oscillator circuit is made up of a capacitor, an inductor, and an amplifier. The capacitor stores energy and passes it through the inductor as a current. At the same time, the inductor produces a magnetic field that affects the current and causes it to reverse direction. The amplifier then amplifies the reversed current, which is sent back to the capacitor. This cycle continues until the energy is depleted or the voltage is too low to continue. The frequency of the oscillations then corresponds to the number of cycles in a given period.

The frequency of the ASEM blank-LC application field can be adjusted by varying the values of the capacitor and inductor in the LC oscillator circuit. This can be done by changing the capacitance and inductance values of the components connected to the oscillator circuit. By controlling the components\' capacitance and inductance, the frequency of the oscillator circuit can be adjusted. This allows the ASEM blank- LC application field to have different frequencies for different applications.

In addition to frequency synthesis, the ASEM blank-LC application field can also be used for remote radio reception. Radio signals may be received at various frequencies, which would need to be converted into a form that can be decoded by a receiver. To do this, the frequency of the received signal is tuned to the same frequency that is fed into the ASEM blank-LC application field. This means that the signal can be received and decoded correctly.

The ASEM blank-LC application field can also be used in frequency counters and channel filters. A frequency counter is a device that measures the frequency of a signal. To do this, the signal is fed into the ASEM blank-LC application field and the frequency of the signal is measured. The same principle is used in channel filters. The filter is set to a certain frequency and signals that fall outside this range are blocked.

In conclusion, the ASEM blank-LC application field is a programmable oscillator that can be used in frequency synthesizers, remote radio receivers, frequency counters and channel filters. It works on the principle of an LC oscillator circuit, with the frequencies being adjusted by varying the capacitance and inductance values of the components. This type of programmable oscillator can provide great benefits for applications that require frequency conversion or frequency selection.

The specific data is subject to PDF, and the above content is for reference