ASEMDC1-LR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Pin Configurable/Selectable Oscillators such as the ASEMDC1-LR are a variety of integrated circuit oscillators that can be programmed on-the-fly via specific pins. Most of these oscillators have a selection of possible frequencies, allowing the user to select one or more that best suit a particular application. The frequency is usually determined by a combination of external components connected to the pins and the oscillator itself.

The ASEMDC1-LR is a low-power, ultra-low voltage linear oscillator that can be easily integrated into a circuit design. The oscillator is fully programmable and configurable via six pins, allowing the user to select the appropriate frequency and output drive strength. This makes the ASEMDC1-LR suitable for a wide range of applications, including micro-controllers, data converters, digital signal processing, and communications.

The programming and configuration of the ASEMDC1-LR is done through the use of external components on its pins. A combination of resistors, capacitors, and inductors are used to select the desired frequency. The output drive strength can be adjusted with a potentiometer. The electromechanical connection of these components is done in a flexible manner, allowing for the easy optimization for the oscillator for different applications.

The operation principle of the ASEMDC1-LR is similar to other types of pin configurable/selectable oscillators. It consists of two stages of operation. The first stage involves the setting of the frequency, while the second stage sets the output drive strength. The frequency is established by a combination of external components connected to the pins via connection points. The same components can also be used to set the output drive strength by changing their electrical characteristics.

Once the components are connected, the oscillator is ready to work. The oscillator is configured to produce a predetermined frequency and generate a predetermined output drive strength, via the combination of the external components. As the oscillator starts running, the signals produced by the oscillator are monitored by the internal logic, which in turn adjust the output drive strength and frequency.

The ASEMDC1-LR is designed for low power applications and is able to operate from as low as 0.9 volts. It is also optimized for low noise operation and is compliant with the IPDIS industry standard. In addition, the oscillator supports a wide range of frequencies, ranging from 1Hz up to 160 MHz.

This pin configurable/selectable oscillator is designed for low power and low noise operation, making it suitable for a range of applications. With its easy programming and configuration, the ASEMDC1-LR is a great choice for applications requiring a programmable oscillator with a wide range of frequencies and output drive strengths.

The specific data is subject to PDF, and the above content is for reference