ASEMPC-133.333MHZ-Z-T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators

Oscillators are electronic circuits used to produce a periodic or pulsating electrical signal. The asynchronic successive effective mid-point controller (ASEMPC)–133.333MHz-Z-T, is an example of an oscillator. It is used to generate an output frequency from 1 MHz to 10kHz.

Application Field

One of the most common applications of the ASEMPC-133.333MHz-Z-T is to provide a stable reference clock in digital systems. It can also be used to provide an output signal of a specific frequency for testing or measurement purposes. Additionally, it can be used for calibration purposes in radio frequency applications.

Working Principle

The ASEMPC-133.333MHz-Z-T oscillator relies on the asynchronous successive effective mid-point controller (ASEMPC) method to generate its output. This method uses an initial voltage to determine the frequency of the output. This voltage is supplied to the oscillator and then compared to a pre-set frequency. The difference between the two values is then output and used to calculate the correct frequency. The result is a very precise, frequency-stable output.

The oscillator uses an on-chip ring oscillator that is designed to oscillate at a particular frequency. This oscillator is then connected to a frequency divider, which divides the frequency into smaller increments. The output of this frequency divider is then compared to a reference voltage and used to adjust the frequency of the output. This ensures that the output frequency is always precise and stable.

Advantages of ASEMPC-133.333MHz-Z-T Oscillator

One of the main advantages of the ASEMPC-133.333MHz-Z-T oscillator is its low power consumption. This oscillator uses less power than other oscillators, making it ideal for battery-powered applications. Its small size also makes it suitable for use in compact systems. Additionally, its high accuracy makes it an ideal choice for testing and calibration applications.

The ASEMPC-133.333MHz-Z-T oscillator is also flexible, allowing it to be used in a variety of applications. Its low cost, easy to use design, and wide frequency range make the oscillator suitable for use in a number of different systems.

Conclusion

The ASEMPC-133.333MHz-Z-T oscillator is a versatile and accurate oscillator. It is used to generate accurate and stable output frequencies from 1 MHz to 10 kHz. It is used in a variety of applications, such as providing reference clocks in digital systems, calibration purposes in radio frequency applications, and testing and measurement purposes. It has a low power consumption and small physical size, making it suitable for use in battery-powered and compact systems.

The specific data is subject to PDF, and the above content is for reference