ASFLMPC-125.000MHZ-LY-T3

Frequency Stability:	±10ppm
Current - Supply (Disable) (Max):	26mA
Height - Seated (Max):	0.035" (0.90mm)
Size / Dimension:	0.197" L x 0.126" W (5.00mm x 3.20mm)
Package / Case:	6-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	35mA
Operating Temperature:	-40°C ~ 85°C
Series:	Pure Silicon™ ASFLMP
Voltage - Supply:	2.25 V ~ 3.6 V
Output:	CMOS
Function:	Enable/Disable
Frequency:	125MHz
Type:	XO (Standard)
Base Resonator:	MEMS
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Oscillators are devices that produce a periodic, oscillating waveform which, according to the definition of a sine wave, could be a sine, triangle or square wave. They are typically used to generate signals with an accurate frequency, for example in a radio transmitter, a phase-locked loop or a digital circuit. This article will discuss the application field and working principle of the ASFLMPC-125.000MHZ-LY-T3 oscillator.

Applications

The ASFLMPC-125.000MHZ-LY-T3 oscillator is widely used in microwave and telecommunications applications where precision frequency control is required. It is particularly useful for applications that require low distortion and low Bias-Tee loading. These include radar systems, frequency synthesizers, attenuators, Wi-Fi radios, and many others.The ASFLMPC-125.000MHZ-LY-T3 can also be used in industrial equipment, such as frequency counters, motor controllers, and measurement equipment. It is also suitable for medical and aerospace applications, such as radio frequency detectors and transponders.

Working Principle

The ASFLMPC-125.000MHZ-LY-T3 oscillator operates by combining an amplifier and resonator to produce an oscillating waveform with defined frequency characteristics. The basic operation of an oscillator can be divided into two stages: The first stage is the “amplification stage”. The amplifier, in this case the ASFLMPC-125.000MHZ-LY-T3, is used to convert a weak input signal of a certain frequency to a much stronger version of the same signal. Here, the voltage gain produced by the amplifier is used to generate an oscillating output signal of the same frequency as the input.The second stage of an oscillator is the “resonant stage”. The resonator, in this case also the ASFLMPC-125.000MHZ-LY-T3, is used to maintain the frequency of the signal produced in the amplification stage. This is achieved by using a capacitive or inductive element that stores energy from the signal and reflect it back to the amplifier. The energy is then amplified again and a new oscillating signal is generated. The new frequency is determined by the type of resonator used.

Conclusion

The ASFLMPC-125.000MHZ-LY-T3 oscillator is a highly accurate and reliable oscillator that is able to produce precise frequency signals required for many different applications. Through amplifying and resonating techniques, the oscillator is able to maintain a frequency of accuracy while providing stable output waveforms. It is highly ideal for both industrial and commercial applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description