ASG-P-X-A-122.880MHZ

Frequency Stability:	±35ppm
Current - Supply (Disable) (Max):	--
Height - Seated (Max):	0.075" (1.90mm)
Size / Dimension:	0.276" L x 0.197" W (7.00mm x 5.00mm)
Package / Case:	6-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	60mA
Operating Temperature:	-40°C ~ 85°C
Series:	ASG-P
Voltage - Supply:	3.3V
Output:	LVPECL
Function:	Enable/Disable
Frequency:	122.88MHz
Type:	XO (Standard)
Base Resonator:	Crystal
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Oscillators are circuit elements which are used to generate a periodic electrical or electromagnetic signal. This periodic signal can consist of a sine wave, square wave, triangle wave or an arbitrary waveform. One common type of oscillator is the ASG-P-X-A-122.880MHZ. This article will discuss the application field and working principle of such oscillators.

Application Field

The ASG-P-X-A-122.880MHZ oscillator is used in many different applications, depending on the particular model. It is commonly used in the automotive industry as a sensor for vibration analysis, and also in some aerospace and consumer electronics applications. Its accuracy and precision makes it an ideal choice for applications that require precise timing. In addition, this oscillator is also used for telecommunication applications, such as radio and TV broadcasting, and also radio navigation and frequency reference systems. As it is very accurate and easy to use, this oscillator is very popular in the consumer electronics and wireless communication industries.

Working Principle

The ASG-P-X-A-122.880MHZ is an analog oscillator which operates on the principle of feedback. It consists of several components, including a power supply, a voltage controlled oscillator (VCO) and an amplifier. The power supply provides the necessary power to the circuit. The VCO is responsible for generating the oscillations. Finally, the amplifier is used to amplify the signal and send it to the output. The working principle of an ASG-P-X-A-122.880MHZ oscillator is based on the concept of positive feedback. This means that the amplifier stage will take a part of the output signal and feed it back into the input of the VCO. This will cause the VCO to generate a periodic waveform, which is then amplified by the amplifier and sent to the output. The frequency of the signal is determined by the capacitance and inductance of the coil in the VCO.

Conclusion

In conclusion, the ASG-P-X-A-122.880MHZ oscillator is a very important component in many different applications. It is accurate and precise, and is used in a variety of industries, such as automotive, aerospace, consumer electronics and telecommunications. It operates on the principle of positive feedback, where a part of the output signal is fed back to the input of the VCO, causing it to generate a periodic waveform. This waveform is then amplified and sent to the output.

The specific data is subject to PDF, and the above content is for reference