ASGTX-C-13.000MHZ-1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are electronic components which generate periodic electrical signals, often at radio frequencies. The ASGTX-C-13.000MHZ-1 is an example of an oscillator. It transmits a signal from a given frequency of 13.000MHz.

The receiver of the signal processes the signal and converts it to a useful form for application. The ASGTX-C-13.000MHZ-1 oscillator is suitable for applications such as broadcast transmissions, communications, and medical imaging.

It can be helpful to understand the working principle of ASGTX-C-13.000MHZ-1 oscillator in order to understand its application. An oscillator normally contains three parts: an amplifier, a feedback network, and an oscillator circuit.

The amplifier part of the oscillator amplifies the incoming signal and sends it to the feedback network. The feedback network contains a resistor, a capacitor and an inductor. The combination of these three components sends a portion of the output from the amplifier back into the input of the amplifier. Then the oscillator circuit is used to control the frequency of the output signal.

When the gain of the amplifier section exceeds the losses of the feedback network, then a stable signal will be generated, which is known as oscillation. The frequency of the oscillator can be adjusted by changing the values of the resistor, capacitor and inductor. Thus, the ASGTX-C-13.000MHZ-1 oscillator works on the same principle and it can be used in several different types of application that require a stable frequency of 13.000MHz.

The ASGTX-C-13.000MHZ-1 oscillator uses an inductor for frequency stabilization. The inductor sent back a signal to the amplifier, which helps to keep the frequency stable. This means that the frequency that is generated will remain constant even if the incoming signal fluctuates. This is important when used in applications such as radio transmitters, where a stable frequency is essential for reliable operation.

The ASGTX-C-13.000MHZ-1 oscillator also uses crystal for frequency stabilization. The crystal acts as an isolator, which means it absorbs any changes in the incoming signal. This is useful when used for applications such as medical imaging, where the signal needs to be consistent and stable.

The ASGTX-C-13.000MHZ-1 oscillator is a reliable and dependable oscillator that can be used in a variety of different applications. Its frequency stability and crystal isolation make it ideal for applications such as broadcast transmissions, communications, and medical imaging. With its robust design, it is sure to provide reliable performance in all of its applications.

The specific data is subject to PDF, and the above content is for reference