ASGTX-D-50.000MHZ-1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are devices that generate a signal of an exact frequency. The particular signal produced by an oscillator is known as an oscillation, capable of being used to send electrical signals or trigger other circuits.
One such oscillator is the ASGTX-D-50.000MHZ-1, a device capable of generating a repeating signal that oscillates at a rate of 50MHz. This type of oscillator is designed to stay within a very tight accuracy range and maintain a consistent waveform. Depending on its application, the oscillator may be set to respond quickly or slowly to environmental changes, providing a reliable source of signal for a variety of applications in a wide range of industries.
The ASGTX-D-50.000MHZ-1 is capable of producing a sinusoidal waveform by slightly altering the output frequency as it passes through the crystal. This sinusoidal waveform produces a low-phase noise signal, which makes the oscillator less prone to interference. Due to its wide frequency range, the ASGTX-D-50.000MHZ-1 can be used for a variety of purposes, from generating a time signal for a clock, to powering a Wi-Fi system or other wireless communication devices. Additionally, the output frequency can be adjusted by simply controlling the amplitude of the driving signal, which can be done in a variety of ways depending on the application.
The ASGTX-D-50.000MHZ-1 is designed to operate under extremely stringent environmental conditions, providing consistent performance in applications where there is a wide range of temperature, vibration and pressure. Thanks to its wide range of temperature control, the oscillator can be used in extreme environments such as vehicle and \'ruggedized\' computing systems, which are often found in military and aerospace applications.
The ASGTX-D-50.000MHZ-1 works by converting an alternating current, (AC), signal into a direct current (DC) signal. The voltage change in the DC signal is then amplified and directed to the crystal, where the signal is converted to a sinusoidal wave of a predetermined frequency. This wave is then used to drive the oscillator circuit. This basic oscillator circuit is comprised of a combination of active devices such as transistors and inductors. The transistors are usually Bi-CMOS or silicon, while the inductors are usually magnetic cores, such as a ferrites or toroid.
The oscillator is designed to maintain a consistent output frequency, even when subjected to changes in temperature, pressure or vibration. To ensure this consistent performance, the active devices must be carefully matched and the frequency drive circuit must be designed to provide an accurate and consistent output signal. The frequency is then adjusted to account for environmental changes, resulting in a signal that is within the accuracy range of the device.
The ASGTX-D-50.000MHZ-1 oscillator is an important device in a range of industrial and consumer applications due to its ability to generate a repeating signal of consistent frequency with low-phase noise. From powering a time signal on a clock, to providing a reliable source of signal for Wi-Fi and other wireless communication devices, applications for the ASGTX-D-50.000MHZ-1 are far ranging and capable of meeting the demands of a wide range of environments.

The specific data is subject to PDF, and the above content is for reference