ASGTX-P-311.040MHZ-1-T2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are electronic components that generate a repeating, cyclical waveform. The ASGTX-P-311.040MHZ-1-T2 is a type of oscillator, specifically a resistance-capacitance oscillator (RC oscillator). It is an active component that produces a stable output based on a combination of electrical resistance and capacitance.

The ASGTX-P-311.040MHZ-1-T2 can generate a variety of waveforms, including sine waves, triangular waves, and square waves. It is commonly used for synchronization, clock signal generation, tuned circuits, and signal processing. It is also used in radio-frequency (RF) applications and for frequency modulation.

The device contains a voltage-variable resistor (potentiometer) that allows for the control of the frequency (or resonance frequency). The oscillator can be tuned to a specific frequency by adjusting the value of the resistor. This makes the device useful in resonant circuits that require a known frequency.

The ASGTX-P-311.040MHZ-1-T2 is also equipped with an on/off switch, allowing for the device to be turned on or off depending on the application. The device is powered by two 1.5V batteries.

Since RC oscillators are generally used for frequencies in the kHz range, the ASGTX-P-311.040MHZ-1-T2 is particularly well suited for radio frequency (RF) applications. It can be used as the modulating element for wireless data transmission, as a signal generator for radar applications, or as a clock signal source in digital applications. The oscillator can also be used to generate a stable frequency signal for frequency modulation and as an oscillator for signal processing.

In essence, the ASGTX-P-311.040MHZ-1-T2 oscillator is a combination of components – a voltage-variable resistor, two capacitors, two batteries, and an on/off switch – that produces a stable output at the desired frequency. The components interact to generate the desired output, with the resistors and capacitors setting the frequency of the oscillations. The on/off switch allows for the oscillator to be turned on or off when the application requires.

The specific data is subject to PDF, and the above content is for reference