ASPI-0310FS-100M-T2 Inductors, Coils, Chokes

DC Resistance (DCR):	350 mOhm
Height - Seated (Max):	0.039" (1.00mm)
Size / Dimension:	0.118" L x 0.118" W (3.00mm x 3.00mm)
Supplier Device Package:	--
Package / Case:	Nonstandard
Mounting Type:	Surface Mount
Inductance Frequency - Test:	100kHz
Operating Temperature:	-25°C ~ 120°C
Ratings:	--
Frequency - Self Resonant:	--
Q @ Freq:	--
Series:	ASPI-0310FS
Shielding:	Shielded
Current - Saturation:	600mA
Current Rating:	900mA
Tolerance:	±20%
Inductance:	10µH
Material - Core:	Nickel Zinc Ferrite (NiZn)
Type:	Wirewound
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed inductors are electrical components used in electronic circuits, typically designed as wire- or foil-wrapped coils. A fixed inductor has a static inductance value and is designed to provide an effective flow of energy when used in an electrical circuit.The ASPI-0310FS-100M-T2 is an example of a fixed inductor.The ASPI-0310FS-100M-T2 fixed inductor is a type of surface-mount device with a relatively high operating temperature of 85 degrees Celsius. The inductance value is rated 100 µH with a ±20 % tolerance, a maximum DC current rating of 4 A and a ripple current rating of 17.5 A. The maximum DC resistance for the inductor is 0.02 ohms and the self-resonant frequency is typified as 640 MHz.As a surface-mount device, the physical size of the ASPI-0310FS-100M-T2 device is designed for installation onto printed circuit boards. Its terminals, or leads, are designed with an eyelet, allowing the installation process to be accomplished with a pick-and-place machine. The maximum height for the terminals is only 0.5 mm, significantly lower than the conventional terminals used for through-hole inductors.Applications for the ASPI-0310FS-100M-T2 fixed inductor include power supplies, voltage regulators, remote control units and automotive electronics, where a controlled and relatively high-voltage is required. The ability to maintain a high operating temperature, along with its low self-resonant frequency, makes the ASPI-0310FS-100M-T2 an attractive choice for high frequency designs.The primary purpose of a fixed inductor is to transfer energy, or current, within an electrical circuit. This process occurs through the generation of a magnetic field, generated by the arrangement of coils within the inductor. Inductors are used to filter frequency components or provide a ‘sag’ in the current to a power supply or select specific frequency components to enhance the circuit’s response.The ASPI-0310FS-100M-T2 fixed inductor is constructed with two copper foils wrapped around a ferrite substrate layered with an insulator, the entire unit then encapsulated to protect it from the environment. As the current to the inductor is increased, the magnetic field generated is increased resulting in a low-pass filter effect. As the voltage is increased, the voltage across the inductor becomes the product of the current and resistance components.To account for inaccuracies in the manufacturing of the ASPI-0310FS-100M-T2 device, or inaccuracies due to component aging, designers allow for an increase in tolerance values to ensure circuit operation isn’t compromised. Generally, the acceptable tolerance is rated as ±20% but can be higher depending on the application.In conclusion, the ASPI-0310FS-100M-T2 fixed inductor is a surface-mount device rated for a maximum operating temperature of 85 degrees Celsius and has a maximum DC resistance of 0.02 ohms and a self-resonant frequency of 640 MHz. It is suitable for use in applications such as power supplies, voltage regulators, remote control units and automotive electronics, and the high-frequency characteristics make it an attractive option for high-frequency designs. The primary purpose of a fixed inductor is to transfer current, or energy, within an electrical circuit, and designers allow for an increased tolerance to ensure the circuit operates correctly and reliably.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description