ASPI-0316S-1R5N-T3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

An ASPI-0316S-1R5N-T3 is a fixed inductor, an electronic component commonly found in a range of consumer and industrial electronic devices. It is a type of inductor that, as its name suggests, has a fixed inductance rating.

The key purpose of an inductor is to store energy in a magnetic field. It does this when a current is applied, creating a time-varying magnetic field that, in turn, induces a voltage across the component. This process is known as electromagnetic induction and the degree of voltage produced is proportional to the rate of change of current passing through the inductor.

An inductor’s effectiveness is determined by two primary factors: size and construction material. The larger a component is, the higher its inductance rating will generally be at a given frequency. But because of the size requirements when choosing components for specific applications – such as in a portable device – the size of most inductors is kept to a minimum. As a result, other factors, such as the inductors construction material, will determine the behavior of an inductor.

The materials used to make inductors are usually either ferrite cores or wire-wound inductors. A ferrite core is a ceramic material with very high permeability that allows current to easily pass through it. This type of inductor has a high inductance rating and is typically used in high-frequency applications. Wire-wound inductors use insulated wires coiled around a core. They tend to have lower inductance ratings than ferrite core inductors, but also have a greater ability to dissipate heat, making them ideal for use in high-power applications.

The ASPI-0316S-1R5N-T3 is a type of wire-wound, fixed inductor. Its inductance rating is 1.5nH and it is designed for use in high-power, high-frequency applications, such as cell phone signal coupling or even in audio circuits. It is constructed with a ceramic core and insulated copper wires, which are wound around the core in a specific pattern to achieve the desired inductance rating.

The inductor is designed to work at frequencies up to 2 GHz, allowing it to be used in a wide range of applications. It is also very small, with external dimensions of just 3.2mm x 1.6mm, making it an ideal choice for portable and compact electronic devices.

The ASPI-0316S-1R5N-T3 Fixed Inductor is a small, high-power, high-frequency component that can be used in a range of applications, from cell phone signal coupling to audio circuits. Its small size and high inductance rating make it an ideal choice for applications which require a component with a very specific design. Its construction consists of an insulated copper wire wound around a ceramic core, which helps to dissipate heat and increase the inductor’s efficiency.

The specific data is subject to PDF, and the above content is for reference