ASPI-0412FS-2R2M-T4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed Inductors

An inductor is an electrical device consisting of a coil of wire around a core of magnetic material. When a current goes through the device, a magnetic field is produced around the core. This field induces a current in the wire, in turn, creating a reactive field. Fixed inductors are those inductors that provide a fixed amount of inductance.

The ASPI-0412FS-2R2M-T4 is one such fixed inductor. It is an inductor specifically designed for inductive loads, i.e. electronic devices such as motors and transformers. It is designed with an industry standard connector and its working voltage is rated up to 200V. The device features a 0.45μH 2.2A inductance and a maximum current rating of 2.2A.

The key application of the ASPI-0412FS-2R2M-T4 is to minimize electrical noise and optimize system performance. This inductor is used as an energy storing device to reduce AC ripple, hence allowing the power supply to remain clean and consistent. In particular, the ASPI-0412FS-2R2M-T4 is often used in high frequency electronic equipment.

The working principle of this fixed inductor is based on Faraday\'s Law of Induction. This law states that an induced current is proportional to the rate of change of the magnetic flux through the circuit. In this case, the inductor is connected in series with the load, and the current flow through the load also causes a current flow through the inductor. This current flow creates a magnetic field, which increases in intensity with increasing current flow and vice versa.

The magnetic field, in turn, creates an inductive back-EMF, which counteracts the current flow, thus limiting and stabilizing the voltage level of the load. This provides protection from overloading and voltage surges while allowing the load to remain operational. In this way, the ASPI-0412FS-2R2M-T4 provides effective protection from electrical noise and optimizes system performance.

In conclusion, the ASPI-0412FS-2R2M-T4 fixed inductor is a high-performance electronic device used in inductive loads such as transformers and motors. It minimizes electrical noise and optimizes system performance by providing a fixed amount of inductance and an effective energy storing and regulating mechanism. Its working principle is based on Faraday\'s Law of Induction, which states that an induced current is proportional to the rate of change of the magnetic flux through the circuit.

The specific data is subject to PDF, and the above content is for reference