ASPI-0705-390K-T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed inductors are widely used in electronic circuits, from basic projects to more complex designs, such as radio frequency (RF) circuits. Among the various available fixed inductors in the market, ASPI-0705-390K-T is a popularly used one.

The ASPI-0705-390K-T is a small, low-profile, SMD fixed inductor with an inductance of 390 Kilo Ohms (K). The inductor has a width of 0.70 mm and a height of 0.50 mm. It is a three-terminal device, with one terminal connected to the main winding, one connecting to the outer winding, and the last connecting to the shielding. The chip is made with a ferrite core, and the housing is made of molded plastic.

The working principle of the ASPI-0705-390K-T is based on the principle of inductance, which states that when a current is passed through a coil of wire, an electric field is created around the coil. This electric field then induces a magnetic field, which in turn induces an electric field and so on. As the current continues to flow, the inductance increases, and this in turn increases the impedance of the coil, which limits the amount of current which can be passed.

The ASPI-0705-390K-T fixed inductor is used mainly in electronic circuits for filtering, tuning, and signal conditioning. It can be used in conjunction with capacitors and resistors to form low-pass or high-pass filters, which can be used for frequency selection, signal shaping, and transient suppression. The inductor can also be used for transformer-coupled amplifier topologies to provide a signal gain. Additionally, the inductor can be used in RF circuits as a matching network component.

In addition, the ASPI-0705-390K-T fixed inductor is suitable for multiple applications in industrial, automotive, and consumer-level electronics. It can be used in applications such as power management, signal conditioning, linear regulator, switching supplies, DC/DC converters, motor control, and audio applications. The device is also suitable for wave-soldering, conformal coating, and board-thru-hole applications.

In summary, the ASPI-0705-390K-T is a widely-used SMD fixed inductor, with an inductance of 390 Kilo Ohms. It has a low-profile size of 0.70 mm x 0.50 mm and three terminals. The device works on the principle of inductance, and is used mainly in electronic circuits for filtering, tuning, and signal conditioning. It is suitable for multiple applications in industrial, automotive, and consumer-level electronics.

The specific data is subject to PDF, and the above content is for reference