ASPI-6045S-820M-T

DC Resistance (DCR):	341 mOhm
Height - Seated (Max):	0.177" (4.50mm)
Size / Dimension:	0.236" L x 0.236" W (6.00mm x 6.00mm)
Supplier Device Package:	--
Package / Case:	Nonstandard
Mounting Type:	Surface Mount
Inductance Frequency - Test:	100kHz
Operating Temperature:	-40°C ~ 125°C
Ratings:	--
Frequency - Self Resonant:	4.9MHz
Q @ Freq:	--
Series:	ASPI-6045S
Shielding:	Shielded
Current - Saturation:	1.05A
Current Rating:	900mA
Tolerance:	±20%
Inductance:	82µH
Material - Core:	Ferrite
Type:	Wirewound
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

• Introduction

Fixed Inductors are used in a variety of applications, from power line chokes to noise suppression in audio circuits, to the primary electrical components in RF circuits. This article will provide an overview of the application field and working principle of ASPI-6045S-820M-T, a type of fixed inductor.

• Application field

ASPI-6045S-820M-T are fixed inductors that come in a variety of sizes and packages. They are commonly used in electronic devices including computer motherboards, sensors, amplifiers, and other complex circuitry. They are typically used for power line noise suppression, providing a uniform AC signal, or adding inductive reactance to restrict the flow of current.The ASPI-6045S-820M-T can also be used in switch mode power supplies for both primary and secondary current control applications. This type of inductor is designed with small enclosed physical dimensions, allowing it to be used in higher density electronic circuits.

• Working principle

A fixed inductor consists of a core of ferromagnetic material, usually iron, wound with many turns of conductive wire. The core increases the inductance of the inductor, while the number of turns determines the inductance. A fixed inductor is designed to store energy in a magnetic field generated by the current in the winding. When an electrical current passes through the inductor, a magnetic field is generated that stores energy in a reverse direction to the flowing current. When the current is removed, the energy stored in the magnetic field is released, causing the magnetic field to collapse, and thus creating a voltage in the opposite direction of the original current. This stored energy opposes any changes in the current, thus creating an inductance, or opposition, to the electrical current.The amount of inductance produced by the ASPI-6045S-820M-T depends on the concentration of the magnetic field in the core, the number of turns in the winding, and the physical size of the core.

• Conclusion

The ASPI-6045S-820M-T is a type of fixed inductor that is used in a variety of applications ranging from power line chokes to current control in switch mode power supplies. The inductor operates by storing energy in an induced magnetic field, and releasing this energy as a voltage in the opposite direction of the original current. The amount of inductance produced by the inductor depends on the concentration of the magnetic field, the number of turns in the winding, and the physical size of the core.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description