ASPI-7318-R10M-T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed inductors, such as the ASPI-7318-R10M-T, are components that provide inductance in an electronic circuit. In most cases, they are used as part of a filter, providing inductance to reduce the amplitude of an AC voltage while providing a low impedance path for components in the same circuit.

Application Field

ASPI-7318-R10M-T is a fixed inductor used for power supply line EMI filtering. This component is useful for attenuating high-frequency signals on power lines, helping to reduce single-mode and common-mode noise. It is designed for single- or dual-core applications with grid currents up to 250A. The ASPI-7318-R10M-T is suitable for high-speed switching circuits, as well as any other circuit needing a reliable, cost-effective EMI filter solution.

Working Principle

The fixed inductor device consists of a conducting path (or core) wound around a ferromagnetic material. The core is generally either iron powder or ferrite, both of which can provide good inductance. The core is usually segmented for ease of winding and to provide various inductance values. The core is wound with a circuit of insulated copper wire, usually called litz wire. The number of turns in the coil will vary depending on the required inductance and the cross-sectional area of the core.

When alternating current passes through a fixed inductor, it develops a magnetic field in the core. This magnetic field then induces a voltage through Faraday\'s Law of Induction. This voltage is proportional to the rate of change of the field and is inversely proportional to the inductance of the component. This voltage counteracts the original voltage, reducing it in a process known as impedance. This impedance will vary depending on the frequency of the current, thus providing an effective frequency-dependent high-pass filter.

Fixed inductors are designed to have minimal characterstic impedance at the high frequencies where EMI is most likely to occur. This enables them to effectively reduce these frequencies, as well as helping to suppress any radio interference that may cause disturbances in the circuit. As the frequency decreases, the impedance of the inductor increases, providing a highly selective filter.

The ASPI-7318-R10M-T may also be connected in parallel with other components, such as capacitors, to form a passive filter. This filter acts as a low-pass filter, with the inductance providing a dampening effect to high frequencies. This dampening helps to reduce resonance and ringing in the circuit, making the signal more stable.

The ASPI-7318-R10M-T is an effective fixed inductor, designed to provide reliable performance in a variety of applications. With its wide bandwidth and low impedance, it is well-suited for power supply line EMI filtering, as well as any other circuit requiring a cost-effective EMI solution.

The specific data is subject to PDF, and the above content is for reference